优化获取测量数据文件接口

src/MeasureClient/MeasureClient.cpp

@@ -1,10 +1,9 @@
 #include "MeasureClient.h"
-#include <QDebug>
 
 MeasureClient::MeasureClient(QObject *parent) : QObject(parent)
 {
-    _host = "localhost";
-    _port = 96966;
+    _host = "127.0.0.1";
+    _port = 9999;
     
     // 创建工作线程
     _workerThread = new QThread(this);
@@ -82,7 +81,13 @@ void MeasureClient::processCommand(const QString &command, const QString &device
     QString message = response["message"].toString();
     
     if (command == "START") {
-        emit startMeasureResult(success, message);
+        QString gvf_filename;
+        if (success) {
+            gvf_filename = response["devices"].toString();
+            emit startMeasureResult(success, gvf_filename);
+        } else {
+            emit startMeasureResult(success, message);
+        }
     } else if (command == "STOP") {
         emit stopMeasureResult(success, message);
     } else if (command == "SET") {
@@ -95,6 +100,8 @@ void MeasureClient::processCommand(const QString &command, const QString &device
             devices = response["devices"].toStringList();
         }
         emit getDeviceListResult(success, devices);
+    } else {
+        emit errorOccurred(message);
     }
 }
 
@@ -111,13 +118,11 @@ QVariantMap MeasureClient::sendCommand(const QString &command, const QString &de
     // 创建临时socket（短连接）
     QTcpSocket socket;
     socket.connectToHost(host, port);
-    
     if (!socket.waitForConnected(3000)) {
-        result["message"] = "Failed to connect to server: " + socket.errorString();
+        result["message"] = QStringLiteral(u"连接服务失败:") + socket.errorString();
         emit errorOccurred(result["message"].toString());
         return result;
     }
-    
     // 发送命令
     QByteArray request_data;
     QDataStream request_stream(&request_data, QIODevice::WriteOnly);
@@ -126,18 +131,16 @@ QVariantMap MeasureClient::sendCommand(const QString &command, const QString &de
     if (!data.isEmpty()) {
         request_stream << data;
     }
-    
     socket.write(request_data);
     if (!socket.waitForBytesWritten(1000)) {
-        result["message"] = "Failed to send command: " + socket.errorString();
+        result["message"] = QStringLiteral(u"发送请求失败:") + socket.errorString();
         emit errorOccurred(result["message"].toString());
         socket.disconnectFromHost();
         return result;
     }
-    
     // 等待响应
     if (!socket.waitForReadyRead(5000)) {
-        result["message"] = "No response from server: " + socket.errorString();
+        result["message"] = QStringLiteral(u"服务无响应:") + socket.errorString();
         emit errorOccurred(result["message"].toString());
         socket.disconnectFromHost();
         return result;
@@ -150,9 +153,7 @@ QVariantMap MeasureClient::sendCommand(const QString &command, const QString &de
     QString response_command;
     bool success;
     response_stream >> response_command >> success;
-    
     result["success"] = success;
-    
     if (response_command == "DEVICE") {
         // 处理设备列表响应
         if (success) {
@@ -166,6 +167,13 @@ QVariantMap MeasureClient::sendCommand(const QString &command, const QString &de
             }
             result["devices"] = devices;
         }
+    } else if ((response_command == "START") && success) {
+        // 处理设备列表响应
+        if (success) {
+            QString measure_gvf_data_filename;
+            response_stream >> measure_gvf_data_filename;
+            result["gvf"] = measure_gvf_data_filename;
+        }
     } else {
         // 处理其他响应
         QString message;
@@ -175,7 +183,9 @@ QVariantMap MeasureClient::sendCommand(const QString &command, const QString &de
     
     // 断开连接
     socket.disconnectFromHost();
-    socket.waitForDisconnected(1000);
+    if (socket.state() != QTcpSocket::UnconnectedState) {
+        socket.waitForDisconnected(1000);
+    }
     
     return result;
 }

src/MeasureClient/MeasureClient.h

@@ -1,60 +0,0 @@
-#ifndef MEASURECLIENT_H
-#define MEASURECLIENT_H
-
-#include <QObject>
-#include <QTcpSocket>
-#include <QDataStream>
-#include <QJsonDocument>
-#include <QJsonObject>
-#include <QVariantMap>
-#include <QVariantList>
-#include <QThread>
-#include <QMutex>
-
-class MeasureClient : public QObject
-{
-    Q_OBJECT
-
-public:
-    explicit MeasureClient(QObject *parent = nullptr);
-    ~MeasureClient();
-
-    // 设置服务器地址和端口
-    void setServerAddress(const QString &host, quint16 port);
-    // 启动测量（异步）
-    void startMeasure(const QString &deviceGuid, const QVariantMap &config);
-    // 停止测量（异步）
-    void stopMeasure(const QString &deviceGuid);
-    // 设置测量参数（异步）
-    void setMeasureConfigParams(const QString &deviceGuid, const QVariantMap &config);
-    // 清除数据（异步）
-    void clearData(const QString &deviceGuid);
-    // 获取设备列表（异步）
-    void getDeviceList();
-
-signals:
-    // 操作结果信号
-    void startMeasureResult(bool success, const QString &message);
-    void stopMeasureResult(bool success, const QString &message);
-    void setMeasureConfigParamsResult(bool success, const QString &message);
-    void clearDataResult(bool success, const QString &message);
-    void getDeviceListResult(bool success, const QStringList &devices);
-    // 错误信号
-    void errorOccurred(const QString &errorString);
-
-private slots:
-    // 处理命令执行
-    void processCommand(const QString &command, const QString &device_guid, const QVariantMap &config);
-
-private:
-    // 发送命令并获取响应（短连接模式）
-    QVariantMap sendCommand(const QString &command, const QString &device_guid, const QString &data = QString());
-
-private:
-    QString _host;
-    quint16 _port;
-    QThread *_workerThread;
-    QMutex _mutex;
-};
-
-#endif // MEASURECLIENT_H

src/src.pro

@@ -7,15 +7,7 @@ msvc {
     QMAKE_CFLAGS += /utf-8
     QMAKE_CXXFLAGS += /utf-8
 }
-DEFINES += ENABLE_DEBUG
-contains(DEFINES, ENABLE_DEBUG) {
-    CONFIG += console
-    win32-msvc* {
-        QMAKE_CXXFLAGS_RELEASE -= -O2
-        QMAKE_CXXFLAGS_RELEASE += /MD /Zi /O
-        QMAKE_LFLAGS_RELEASE += /DEBUG
-    }
-}
+
 
 include($${PWD}/../Common.pri)
 include($${PROJECT_DIR}/3rdlib/QsLog/QsLog.pri)
@@ -167,5 +159,13 @@ FORMS += \
     ThreeDimensionalConformityAnalysisView/ConformityAnalysis.ui
 
 
-
+DEFINES += ENABLE_DEBUG
+contains(DEFINES, ENABLE_DEBUG) {
+    CONFIG += console
+    win32-msvc* {
+        QMAKE_CXXFLAGS_RELEASE -= -O2
+        QMAKE_CXXFLAGS_RELEASE += /MD /Zi /O
+        QMAKE_LFLAGS_RELEASE += /DEBUG
+    }
+}