diff --git a/logPlus/mainwindowcurve.cpp b/logPlus/mainwindowcurve.cpp
index e50b503..2713c95 100644
--- a/logPlus/mainwindowcurve.cpp
+++ b/logPlus/mainwindowcurve.cpp
@@ -3578,10 +3578,6 @@ void MainWindowCurve::s_NewCoreImage()
 //斜井三图一表
 void MainWindowCurve::s_NewSantuyibiao()
 {
-//    QStringList sret = this->getSelectWell();
-//    if(sret.length() <= 0)
-//        return;
-
     //选中道
     if(m_SelectTableItem.m_iTableType==2) {
         //斜井三图一表
@@ -3600,10 +3596,6 @@ void MainWindowCurve::s_NewSantuyibiao()
 //裂缝
 void MainWindowCurve::s_NewCrack()
 {
-//    QStringList sret = this->getSelectWell();
-//    if(sret.length() <= 0)
-//        return;
-
     //选中道
     if(m_SelectTableItem.m_iTableType==2) {
         //新建表格曲线
@@ -3656,8 +3648,16 @@ void MainWindowCurve::s_pinLvAc()
     emit CallManage::getInstance()->sig_NewCol(dt);
 }
 
+//杆状图
 void MainWindowCurve::s_NewGanZhuangTu()
 {
+    //选中道
+    if(m_SelectTableItem.m_iTableType==2) {
+        //新建杆状图
+        emit CallManage::getInstance()->sig_AddGanZhuangTu(m_strUuid, m_SelectTableItem.m_strSlfName, m_SelectTableItem.m_strWellName, m_SelectTableItem.m_strTrackName, "GANZHUANG.LINE");
+        return;
+    }
+
 	int nW = 4;
 	QStringList sret = this->insertCol(nW);
 	if (sret.length() <= 0)
@@ -3709,6 +3709,13 @@ void MainWindowCurve::s_dcaAc()
 //井眼垮塌矢量图
 void MainWindowCurve::s_Jykt()
 {
+    //选中道
+    if(m_SelectTableItem.m_iTableType==2) {
+        //新建井眼垮塌矢量图
+        emit CallManage::getInstance()->sig_AddJykt(m_strUuid, m_SelectTableItem.m_strSlfName, m_SelectTableItem.m_strWellName, m_SelectTableItem.m_strTrackName, "JINGYANKUATA.LINE");
+        return;
+    }
+
     int nW = 4;
     QStringList sret = this->insertCol(nW);
     if (sret.length() <= 0)
@@ -3724,6 +3731,13 @@ void MainWindowCurve::s_Jykt()
 //井斜方位图
 void MainWindowCurve::s_Denv()
 {
+    //选中道
+    if(m_SelectTableItem.m_iTableType==2) {
+        //新建井斜方位图
+        emit CallManage::getInstance()->sig_AddDenv(m_strUuid, m_SelectTableItem.m_strSlfName, m_SelectTableItem.m_strWellName, m_SelectTableItem.m_strTrackName, "XIEFANGWEI.LINE");
+        return;
+    }
+
     int nW = 4;
     QStringList sret = this->insertCol(nW);
     if (sret.length() <= 0)
@@ -3739,52 +3753,13 @@ void MainWindowCurve::s_Denv()
 //图像 成图
 void MainWindowCurve::s_DrawImage()
 {
-//    QString strSlfName = "";
-//    QString strLeft = m_leftWidgets->getLeftTreeString();
-//    if(strLeft.length() > 0)
-//    {
-//        QStringList list = strLeft.split("#@@#");//QString字符串分割函数
-//        if (list.size() > 3)
-//        {
-//            strSlfName = list[0];
-//        }
-//    }
-
-    if(ui->tableWidget_2->columnCount()==0)
-    {
-        return;
-    }
-
-    int column = ui->tableWidget_2->currentColumn();//列编号从0开始
-    if(column<0)
-    {
-        //当前没有选中井
-        QMessageBox::warning(this, "提示", "当前没有选中井", "确定");
-        return;
-    }
-
-    if(column%2==0)
-    {
-    }
-    else
-    {
-        //空白列
-        QMessageBox::warning(this, "提示", "当前没有选中井", "确定");
-        return;
-    }
-
-	QStringList sret = this->getSelectWell_New();
-	if (sret.length() <= 0)
-		return;
-	QString strWellName = sret.at(0);
-	//直接从选中的井获取，data记录slf路径
-	QString strSlfName = sret.at(1);
-
-    int iWidth = ui->tableWidget_2->columnWidth(column);
-
     int nW = 4;
-    //设置列宽
-    ui->tableWidget_2->setColumnWidth(column, iWidth+nW*g_dPixelPerCm+8);
+    QStringList sret = this->insertCol(nW);
+    if (sret.length() <= 0)
+        return;
+    QString strWellName = sret.at(0);
+    //直接从选中的井获取，data记录slf路径
+    QString strSlfName = sret.at(1);
 
     //新建道
     emit CallManage::getInstance()->sig_NewTrack(m_strUuid, strWellName, strSlfName, "成像", "DrawImageObject", nW);
@@ -3811,10 +3786,6 @@ void MainWindowCurve::s_NewGeoSection()
 //气测/FMT/射孔/文本
 void MainWindowCurve::s_NewJiegutext()
 {
-//    QStringList sret = this->getSelectWell();
-//    if(sret.length() <= 0)
-//        return;
-
     //选中道
     if(m_SelectTableItem.m_iTableType==2) {
         //气测/FMT/射孔/文本
@@ -3833,10 +3804,6 @@ void MainWindowCurve::s_NewJiegutext()
 //沉积相
 void MainWindowCurve::s_NewLogface()
 {
-//    QStringList sret = this->getSelectWell();
-//    if(sret.length() <= 0)
-//        return;
-
     //选中道
     if(m_SelectTableItem.m_iTableType==2) {
         //沉积相
@@ -3855,6 +3822,13 @@ void MainWindowCurve::s_NewLogface()
 //多臂井径
 void MainWindowCurve::s_NewMCals()
 {
+    //选中道
+    if(m_SelectTableItem.m_iTableType==2) {
+        //多臂井径
+        emit CallManage::getInstance()->sig_AddMCals(m_strUuid, m_SelectTableItem.m_strSlfName, m_SelectTableItem.m_strWellName, m_SelectTableItem.m_strTrackName, "FCA2");
+        return;
+    }
+
     QStringList sret = this->getSelectWell();
     if(sret.length() <= 0)
         return;
@@ -3866,10 +3840,6 @@ void MainWindowCurve::s_NewMCals()
 //套管组件
 void MainWindowCurve::s_NewTubingstring()
 {
-//    QStringList sret = this->getSelectWell();
-//    if(sret.length() <= 0)
-//        return;
-
     //选中道
     if(m_SelectTableItem.m_iTableType==2) {
         //套管组件