支持双击编辑固井、地质层位道、曲线、录井剖面、岩性描述文字结论

logPlus/TransparentDraggableGeoLith.cpp

@@ -830,6 +830,10 @@ int TransparentDraggableGeoLith::getCursor()
     {
         return 1;
     }
+    if(m_bNormal)
+    {
+        return 3;
+    }
     return 0;
 }
 
@@ -847,6 +851,16 @@ void TransparentDraggableGeoLith::onMouseMove(QMouseEvent *event)
     }
     else
     {
+        double y = mPlot->xAxis->pixelToCoord(event->pos().y());//x轴展示深度
+        QCPRange currentRange = getRange();
+        if(y >= currentRange.lower && y <= currentRange.upper) {
+            m_bNormal = true;
+        }
+        else
+        {
+            m_bNormal = false;
+        }
+        //
         m_bArrow = false;
         m_bMoveRect = false;
     }

logPlus/TransparentDraggableGeoLith.h

@@ -111,6 +111,7 @@ public:
     //鼠标形状
     bool m_bArrow = false;
     bool m_bMoveRect = false;
+    bool m_bNormal = false;
     int getCursor();
     //鼠标是否拖动item
     bool m_bChange = false;

logPlus/TransparentDraggableGujing.cpp

@@ -513,6 +513,10 @@ int TransparentDraggableGujing::getCursor()
     {
         return 1;
     }
+    if(m_bNormal)
+    {
+        return 3;
+    }
     return 0;
 }
 
@@ -530,6 +534,16 @@ void TransparentDraggableGujing::onMouseMove(QMouseEvent *event)
     }
     else
     {
+        double y = mPlot->xAxis->pixelToCoord(event->pos().y());//x轴展示深度
+        QCPRange currentRange = getRange();
+        if(y >= currentRange.lower && y <= currentRange.upper) {
+            m_bNormal = true;
+        }
+        else
+        {
+            m_bNormal = false;
+        }
+        //
         m_bArrow = false;
         m_bMoveRect = false;
     }

logPlus/TransparentDraggableGujing.h

@@ -91,6 +91,7 @@ public:
     //鼠标形状
     bool m_bArrow = false;
     bool m_bMoveRect = false;    
+    bool m_bNormal = false;
     int getCursor();
     //鼠标是否拖动item
     bool m_bChange = false;

logPlus/TransparentDraggableLayer.cpp

@@ -445,6 +445,10 @@ int TransparentDraggableLayer::getCursor()
     {
         return 1;
     }
+    if(m_bNormal)
+    {
+        return 3;
+    }
     return 0;
 }
 
@@ -462,6 +466,16 @@ void TransparentDraggableLayer::onMouseMove(QMouseEvent *event)
     }
     else
     {
+        double y = mPlot->xAxis->pixelToCoord(event->pos().y());//x轴展示深度
+        QCPRange currentRange = getRange();
+        if(y >= currentRange.lower && y <= currentRange.upper) {
+            m_bNormal = true;
+        }
+        else
+        {
+            m_bNormal = false;
+        }
+        //
         m_bArrow = false;
         m_bMoveRect = false;
     }

logPlus/TransparentDraggableLayer.h

@@ -104,6 +104,7 @@ public:
     //鼠标形状
     bool m_bArrow = false;
     bool m_bMoveRect = false;
+    bool m_bNormal = false;
     int getCursor();
     //鼠标是否拖动item
     bool m_bChange = false;

logPlus/TransparentDraggableRect.cpp

@@ -333,6 +333,10 @@ int TransparentDraggableRect::getCursor()
     {
         return 1;
     }
+    if(m_bNormal)
+    {
+        return 3;
+    }
     return 0;
 }
 
@@ -350,6 +354,16 @@ void TransparentDraggableRect::onMouseMove(QMouseEvent *event)
     }
     else
     {
+        double y = mPlot->xAxis->pixelToCoord(event->pos().y());//x轴展示深度
+        QCPRange currentRange = getRange();
+        if(y >= currentRange.lower && y <= currentRange.upper) {
+            m_bNormal = true;
+        }
+        else
+        {
+            m_bNormal = false;
+        }
+        //
         m_bArrow = false;
         m_bMoveRect = false;
     }

logPlus/TransparentDraggableRect.h

@@ -96,6 +96,7 @@ public:
     //鼠标形状
     bool m_bArrow = false;
     bool m_bMoveRect = false;
+    bool m_bNormal = false;
     int getCursor();
     //鼠标是否拖动item
     bool m_bChange = false;

logPlus/qmycustomplot.cpp

@@ -1311,6 +1311,44 @@ void QMyCustomPlot::mouseDoubleClickEvent(QMouseEvent *event)
         // 在这里添加你的双击处理逻辑
         m_bEditor = true;
 
+        //曲线
+        if(m_addRandomGraph && m_strLineName != "CORE_PHYSICS")
+        {
+            //双击编辑曲线
+            onEditLine();
+        }
+        else if (m_strLineName == "GEO_LITH")
+        {
+            //录井剖面
+            onEditGeoLith();
+        }
+        else if (m_strLineName == "WORDS_RELUST")
+        {
+            //岩性描述，文字结论
+            onEditText();
+        }
+        else if (m_strLineName == "LAYER_DATA")
+        {
+            //地质分层
+            onEditLayer();
+        }
+
+        //------------
+        if(m_strType == "")
+        {
+            FormInfo* pInfo = m_formTrack->getFormInfoByParameters(m_strUuid, m_strWellName, m_strTrackName, m_strLineName);
+            if (pInfo == NULL)
+            {
+                return;
+            }
+            m_strType = pInfo->m_strType;
+        }
+        if (m_strType == "gujingObject")
+        {
+            //双击编辑固井
+            onEditGujing();
+        }        
+
         // 接受事件
         event->accept();
     }
@@ -1450,7 +1488,7 @@ void QMyCustomPlot::mouseMoveEvent(QMouseEvent *event)
 
     QCustomPlot::mouseMoveEvent(event);
 
-    int nmaxCursor = 0;
+    int nmaxCursor = -1;
     //解释结论
     QObjectList objList = m_mapDragGroup.values();
     for( int i = 0; i< objList.size(); i++)
@@ -1577,7 +1615,7 @@ void QMyCustomPlot::mouseMoveEvent(QMouseEvent *event)
     {
         this->setCursor(Qt::SizeVerCursor);
     }
-    else
+    else if (nmaxCursor == 3)
     {
         QCursor currentCursor = this->cursor();
         if(currentCursor == Qt::CrossCursor)
@@ -1588,6 +1626,63 @@ void QMyCustomPlot::mouseMoveEvent(QMouseEvent *event)
             this->setCursor(Qt::ArrowCursor);
         }
     }
+    else
+    {
+		bool bCheck = false;	
+		//曲线
+        /*if(m_addRandomGraph && m_strLineName != "CORE_PHYSICS")
+	    {
+			bCheck = true;
+		}
+        else */if (m_strLineName == "GEO_LITH")
+	    {
+			//录井剖面
+			bCheck = true;
+		}
+	    else if (m_strLineName == "WORDS_RELUST")
+	    {
+	        //岩性描述，文字结论
+			bCheck = true;	
+		}
+	    else if (m_strLineName == "LAYER_DATA")
+	    {
+	        //地质分层	
+			bCheck = true;
+		}	
+		
+        //
+        if(m_strType == "")
+        {
+            FormInfo* pInfo = m_formTrack->getFormInfoByParameters(m_strUuid, m_strWellName, m_strTrackName, m_strLineName);
+            if (pInfo == NULL)
+            {
+                return;
+            }
+            m_strType = pInfo->m_strType;
+        }
+
+        //
+        if (m_strType == "gujingObject")
+        {
+			bCheck = true;
+		}
+		if(bCheck)
+		{
+            //十字标，编辑
+            if(m_bEditRect)
+            {
+                this->setCursor(Qt::CrossCursor);
+            }
+            else
+            {
+                this->setCursor(Qt::ArrowCursor);
+            }
+        }
+        else
+        {
+            this->setCursor(Qt::ArrowCursor);
+        }
+    }
 //    if (mMousePress) {
 //        auto items = selectedItems();
 
@@ -1792,6 +1887,7 @@ void QMyCustomPlot::s_LineClicked(int index)
 //    }
 }
 
+//右键
 void QMyCustomPlot::contextMenuEvent(QContextMenuEvent *event)
 {
     m_event = event;
@@ -1802,7 +1898,13 @@ void QMyCustomPlot::contextMenuEvent(QContextMenuEvent *event)
         menu.addAction(QIcon(::GetImagePath() +  "icon/ZonePoint.png"), "添加分段线", this, &QMyCustomPlot::onAddShiftLine);
         menu.addAction(QIcon(::GetImagePath() +  "icon/ClearZonePoint.png"), "清除当前分段线", this, &QMyCustomPlot::onDelSelectShiftLine);
         menu.addAction(QIcon(::GetImagePath() +  "icon/ClearZone.png"), "清除全部分段线", this, &QMyCustomPlot::onDelAllShiftLine);
+        if(m_bEditRect)
+        {
+            menu.addAction(QIcon(::GetImagePath() +  "curve.png"), "关闭编辑曲线", this, &QMyCustomPlot::onCloseEditLine);
+        }
+        else{
             menu.addAction(QIcon(::GetImagePath() +  "curve.png"), "开始编辑曲线", this, &QMyCustomPlot::onEditLine);
+        }
         menu.exec(event->globalPos());
     }
 
@@ -1822,7 +1924,13 @@ void QMyCustomPlot::contextMenuEvent(QContextMenuEvent *event)
     {
         QMenu menu(this);
         //录井剖面
+		if(m_bEditRect)
+        {
+            menu.addAction(QIcon(::GetImagePath() +  "curve.png"), "关闭编辑录井剖面", this, &QMyCustomPlot::onCloseEditGeoLith);
+        }
+		else{
         	menu.addAction(QIcon(::GetImagePath() +  "curve.png"), "开始编辑录井剖面", this, &QMyCustomPlot::onEditGeoLith);
+        }
 		menu.addAction(QIcon(::GetImagePath() +  "icon/CopyCoreTxt.png"), "从剪切板文本数据粘贴", this, &QMyCustomPlot::addItems_GeoLith);
         menu.addAction(QIcon(::GetImagePath() +  "icon/ClearSelectCore.png"), "取消选中", this, &QMyCustomPlot::ClearSelectItems);
         menu.addAction(QIcon(::GetImagePath() +  "icon/Delete.png"), "全部清空", this, &QMyCustomPlot::DeleteItems_GeoLith);
@@ -1833,7 +1941,13 @@ void QMyCustomPlot::contextMenuEvent(QContextMenuEvent *event)
     {
         QMenu menu(this);
         //岩性描述，文字结论
+		if(m_bEditRect)
+        {
+            menu.addAction(QIcon(::GetImagePath() +  "curve.png"), "关闭编辑文字结论", this, &QMyCustomPlot::onCloseEditText);
+		}
+		else{
         	menu.addAction(QIcon(::GetImagePath() +  "curve.png"), "开始编辑文字结论", this, &QMyCustomPlot::onEditText);
+        }
 		menu.addAction(QIcon(::GetImagePath() +  "icon/CopyCoreTxt.png"), "从剪切板文本数据粘贴", this, &QMyCustomPlot::addItems_Text);
         menu.addAction(QIcon(::GetImagePath() +  "icon/ClearSelectCore.png"), "取消选中", this, &QMyCustomPlot::ClearSelectItems);
         menu.addAction(QIcon(::GetImagePath() +  "icon/Delete.png"), "全部清空", this, &QMyCustomPlot::DeleteItems_Text);
@@ -1844,7 +1958,13 @@ void QMyCustomPlot::contextMenuEvent(QContextMenuEvent *event)
     {
         QMenu menu(this);
         //地质分层
+		if(m_bEditRect)
+        {
+            menu.addAction(QIcon(::GetImagePath() +  "curve.png"), "关闭编辑地质分层", this, &QMyCustomPlot::onCloseEditLayer);
+		}
+		else{
         	menu.addAction(QIcon(::GetImagePath() +  "curve.png"), "开始编辑地质分层", this, &QMyCustomPlot::onEditLayer);
+        }
 		menu.addAction(QIcon(::GetImagePath() +  "icon/CopyCoreTxt.png"), "从剪切板文本数据粘贴", this, &QMyCustomPlot::addItems_Layer);
         menu.addAction(QIcon(::GetImagePath() +  "icon/ClearSelectCore.png"), "取消选中", this, &QMyCustomPlot::ClearSelectItems);
         menu.addAction(QIcon(::GetImagePath() +  "icon/Delete.png"), "全部清空", this, &QMyCustomPlot::DeleteItems_Layer);
@@ -1915,13 +2035,16 @@ void QMyCustomPlot::contextMenuEvent(QContextMenuEvent *event)
     }
 
     //
+    if(m_strType == "")
+    {
         FormInfo* pInfo = m_formTrack->getFormInfoByParameters(m_strUuid, m_strWellName, m_strTrackName, m_strLineName);
         if (pInfo == NULL)
         {
             return;
         }
-    QString strType = pInfo->m_strType;
+        m_strType = pInfo->m_strType;
-    if (strType == "JiegutextObject")
+    }
+    if (m_strType == "JiegutextObject")
     {
         QMenu menu(this);
         //气测/FMT/射孔/文本
@@ -1931,11 +2054,17 @@ void QMyCustomPlot::contextMenuEvent(QContextMenuEvent *event)
         menu.addAction(QIcon(::GetImagePath() +  "icon/CopyCoreTxt.png"), "刷新数据", this, &QMyCustomPlot::RefreshItems_Jiegutext);
         menu.exec(event->globalPos());
     }
-    else if (strType == "gujingObject")
+    else if (m_strType == "gujingObject")
     {
         QMenu menu(this);
         //固井
+        if(m_bEditRect)
+        {
+            menu.addAction(QIcon(::GetImagePath() +  "curve.png"), "关闭编辑固井结论", this, &QMyCustomPlot::onCloseEditGujing);
+        }
+        else{
             menu.addAction(QIcon(::GetImagePath() +  "curve.png"), "开始编辑固井结论", this, &QMyCustomPlot::onEditGujing);
+        }
         menu.addAction(QIcon(::GetImagePath() +  "icon/CopyCoreTxt.png"), "从剪切板文本数据粘贴", this, &QMyCustomPlot::addItems_Gujing);
         menu.addAction(QIcon(::GetImagePath() +  "icon/ClearSelectCore.png"), "取消选中", this, &QMyCustomPlot::ClearSelectItems);
         menu.addAction(QIcon(::GetImagePath() +  "icon/Delete.png"), "全部清空", this, &QMyCustomPlot::DeleteItems_Gujing);
@@ -1943,7 +2072,7 @@ void QMyCustomPlot::contextMenuEvent(QContextMenuEvent *event)
         menu.addAction(QIcon(::GetImagePath() +  "development.png"), "合并结论", this, &QMyCustomPlot::MegResult_Gujing);
         menu.exec(event->globalPos());
     }
-    else if (strType == "LogfaceObject")
+    else if (m_strType == "LogfaceObject")
     {
         QMenu menu(this);
         //沉积相
@@ -1951,7 +2080,7 @@ void QMyCustomPlot::contextMenuEvent(QContextMenuEvent *event)
         //menu.addAction(QIcon(::GetImagePath() +  "icon/Layer.png"), "沉积相自动描述", this, &QMyCustomPlot::ChangeDep);
         menu.exec(event->globalPos());
     }
-    else if (strType == "TubingstringObject")
+    else if (m_strType == "TubingstringObject")
     {
         QStringList strs=zoneOrder_Tubing.keys();
         QStringList mstrs=QString("油管接箍,套管接箍,偏配,封隔器,筛管,喇叭口,水力猫,短接,管底部,油管深").split(",");
@@ -1976,7 +2105,7 @@ void QMyCustomPlot::contextMenuEvent(QContextMenuEvent *event)
 
         menu.exec(event->globalPos());
     }
-    else if (strType == "CrackObject") // 裂缝
+    else if (m_strType == "CrackObject") // 裂缝
     {
         QMenu menu(this);
         menu.addAction(QIcon(::GetImagePath() +  "curve.png"), "添加裂缝", this, &QMyCustomPlot::addCrackObject);
@@ -2019,6 +2148,9 @@ void QMyCustomPlot::onEditLine()
     }
     this->setInteractions(QCP::iSelectAxes | QCP::iSelectLegend | QCP::iSelectPlottables | QCP::iMultiSelect);   // 轴、图例、图表可以被选择，并且是多选的方式
     this->setSelectionRectMode(QCP::srmCustom);             // 鼠标框选
+    //this->setCursor(Qt::CrossCursor);
+
+    m_bEditRect=true;//当前是否正在编辑曲线。
 
     if(m_bFirstTimeConnect)
     {
@@ -2039,7 +2171,6 @@ void QMyCustomPlot::onEditLine()
             }
             // 当选择完成时，获取矩形范围并放大
             QRectF rect = this->selectionRect()->rect(); // 获取选择的矩形区域（像素坐标）
-            m_bEditRect=true;//当前是否正在编辑曲线。
 
             // 转换为坐标轴范围
             double top = rect.top();
@@ -2073,7 +2204,7 @@ void QMyCustomPlot::onEditLine()
                 }
             }
 
-            if(abs(right_Hight-left_Low) >= (3*rlev) )//至少选中5个点
+            if(abs(right_Hight-left_Low) >= (3*rlev) && abs(right_Hight_Number-left_Low_Number)>0)//至少选中5个点
             {
     //            for (int j=right_Hight_Number; j<left_Low_Number-1; j++)
     //            {
@@ -2099,12 +2230,36 @@ void QMyCustomPlot::onEditLine()
     }
 }
 
+//右键--关闭编辑曲线
+void QMyCustomPlot::onCloseEditLine()
+{
+    //删除
+    TransparentDraggableSelectRect *pDraggableRect =NULL;
+    {
+        QMap<QString,QObject *>::Iterator it = this->m_mapDraggable_SelectRect.begin();
+        if( it != this->m_mapDraggable_SelectRect.end() )
+        {
+            pDraggableRect = (TransparentDraggableSelectRect*)it.value();
+            pDraggableRect->deleteRect();
+        }
+    }
+    replot();
+
+    m_bEditRect = false;
+
+    //取消框选
+    this->setInteractions(QCP::iSelectLegend | QCP::iSelectPlottables);
+    this->setSelectionRectMode(QCP::srmNone);
+}
+
 //右键--添加文字结论
 void QMyCustomPlot::onEditText()
 {
     this->setInteractions(QCP::iSelectAxes | QCP::iSelectLegend | QCP::iSelectPlottables | QCP::iMultiSelect);   // 轴、图例、图表可以被选择，并且是多选的方式
     this->setSelectionRectMode(QCP::srmCustom);             // 鼠标框选
+    this->setCursor(Qt::CrossCursor);
 
+    m_bEditRect=true;//当前是否正在编辑曲线。
     if(m_bFirstTimeConnect)
     {
         //信号槽只绑定一次，避免重复绑定
@@ -2124,7 +2279,6 @@ void QMyCustomPlot::onEditText()
             }
             // 当选择完成时，获取矩形范围并放大
             QRectF rect = this->selectionRect()->rect(); // 获取选择的矩形区域（像素坐标）
-            m_bEditRect=true;//当前是否正在编辑曲线。
 
             // 转换为坐标轴范围
             double top = rect.top();
@@ -2171,20 +2325,30 @@ void QMyCustomPlot::onEditText()
                 //属性清空
                 PropertyService()->InitCurrentViewInfo();
 
-                //取消框选
+//                //取消框选
-                this->setInteractions(QCP::iSelectLegend | QCP::iSelectPlottables);
+//                this->setInteractions(QCP::iSelectLegend | QCP::iSelectPlottables);
-                this->setSelectionRectMode(QCP::srmNone);
+//                this->setSelectionRectMode(QCP::srmNone);
             }
         });
     }
 }
+//右键--关闭编辑文字结论
+void QMyCustomPlot::onCloseEditText()
+{
+    m_bEditRect = false;
+    //取消框选
+    this->setInteractions(QCP::iSelectLegend | QCP::iSelectPlottables);
+    this->setSelectionRectMode(QCP::srmNone);
+}
 
 //右键--添加地质分层
 void QMyCustomPlot::onEditLayer()
 {
     this->setInteractions(QCP::iSelectAxes | QCP::iSelectLegend | QCP::iSelectPlottables | QCP::iMultiSelect);   // 轴、图例、图表可以被选择，并且是多选的方式
     this->setSelectionRectMode(QCP::srmCustom);             // 鼠标框选
+    this->setCursor(Qt::CrossCursor);
 
+    m_bEditRect=true;//当前是否正在编辑曲线。
     if(m_bFirstTimeConnect)
     {
         //信号槽只绑定一次，避免重复绑定
@@ -2204,7 +2368,6 @@ void QMyCustomPlot::onEditLayer()
             }
             // 当选择完成时，获取矩形范围并放大
             QRectF rect = this->selectionRect()->rect(); // 获取选择的矩形区域（像素坐标）
-            m_bEditRect=true;//当前是否正在编辑曲线。
 
             // 转换为坐标轴范围
             double top = rect.top();
@@ -2260,11 +2423,24 @@ void QMyCustomPlot::onEditLayer()
     }
 }
 
+//右键--关闭编辑地质分层
+void QMyCustomPlot::onCloseEditLayer()
+{
+    m_bEditRect=false;
+
+    //取消框选
+    this->setInteractions(QCP::iSelectLegend | QCP::iSelectPlottables);
+    this->setSelectionRectMode(QCP::srmNone);
+}
+
 //右键--添加固井
 void QMyCustomPlot::onEditGujing()
 {
     this->setInteractions(QCP::iSelectAxes | QCP::iSelectLegend | QCP::iSelectPlottables | QCP::iMultiSelect);   // 轴、图例、图表可以被选择，并且是多选的方式
     this->setSelectionRectMode(QCP::srmCustom);             // 鼠标框选
+    this->setCursor(Qt::CrossCursor);
+
+    m_bEditRect=true;//当前是否正在编辑曲线。
 
     if(m_bFirstTimeConnect)
     {
@@ -2285,7 +2461,6 @@ void QMyCustomPlot::onEditGujing()
             }
             // 当选择完成时，获取矩形范围并放大
             QRectF rect = this->selectionRect()->rect(); // 获取选择的矩形区域（像素坐标）
-            m_bEditRect=true;//当前是否正在编辑曲线。
 
             // 转换为坐标轴范围
             double top = rect.top();
@@ -2332,14 +2507,24 @@ void QMyCustomPlot::onEditGujing()
                 //属性清空
                 PropertyService()->InitCurrentViewInfo();
 
-                //取消框选
+//                //取消框选
-                this->setInteractions(QCP::iSelectLegend | QCP::iSelectPlottables);
+//                this->setInteractions(QCP::iSelectLegend | QCP::iSelectPlottables);
-                this->setSelectionRectMode(QCP::srmNone);
+//                this->setSelectionRectMode(QCP::srmNone);
             }
         });
     }
 }
 
+//右键--关闭编辑固井
+void QMyCustomPlot::onCloseEditGujing()
+{
+    m_bEditRect = false;
+
+    //取消框选
+    this->setInteractions(QCP::iSelectLegend | QCP::iSelectPlottables);
+    this->setSelectionRectMode(QCP::srmNone);
+}
+
 // 岩心图片
 void QMyCustomPlot::onEditImage()
 {
@@ -2829,7 +3014,9 @@ void QMyCustomPlot::onEditGeoLith()
 {
     this->setInteractions(QCP::iSelectAxes | QCP::iSelectLegend | QCP::iSelectPlottables | QCP::iMultiSelect);   // 轴、图例、图表可以被选择，并且是多选的方式
     this->setSelectionRectMode(QCP::srmCustom);             // 鼠标框选
+    this->setCursor(Qt::CrossCursor);
 
+    m_bEditRect=true;//当前是否正在编辑曲线。
     if(m_bFirstTimeConnect)
     {
         //信号槽只绑定一次，避免重复绑定
@@ -2849,7 +3036,6 @@ void QMyCustomPlot::onEditGeoLith()
             }
             // 当选择完成时，获取矩形范围并放大
             QRectF rect = this->selectionRect()->rect(); // 获取选择的矩形区域（像素坐标）
-            m_bEditRect=true;//当前是否正在编辑曲线。
 
             // 转换为坐标轴范围
             double top = rect.top();
@@ -2977,14 +3163,24 @@ void QMyCustomPlot::onEditGeoLith()
                 //属性清空
                 PropertyService()->InitCurrentViewInfo();
 
-                //取消框选
+//                //取消框选
-                this->setInteractions(QCP::iSelectLegend | QCP::iSelectPlottables);
+//                this->setInteractions(QCP::iSelectLegend | QCP::iSelectPlottables);
-                this->setSelectionRectMode(QCP::srmNone);
+//                this->setSelectionRectMode(QCP::srmNone);
             }
         });
     }
 }
 
+//右键--关闭编辑录井剖面
+void QMyCustomPlot::onCloseEditGeoLith()
+{
+    m_bEditRect=false;
+
+    //取消框选
+    this->setInteractions(QCP::iSelectLegend | QCP::iSelectPlottables);
+    this->setSelectionRectMode(QCP::srmNone);
+}
+
 bool QMyCustomPlot::SaveToSLF_SwallCore()
 {
     static int isrun=false;

logPlus/qmycustomplot.h

@@ -559,12 +559,14 @@ public slots:
 
     //右键--编辑曲线
     void onEditLine();
+    void onCloseEditLine();
 
     //通用
     void ClearSelectItems();    //取消选中
 
     //右键--编辑固井
     void onEditGujing();
+    void onCloseEditGujing();
     void addItems_Gujing();     //从剪切板文本数据粘贴
     void DeleteItems_Gujing();  //全部清空
     void RefreshItems_Gujing(); //刷新数据
@@ -598,6 +600,7 @@ public slots:
 
     //右键--编辑录井剖面
     void onEditGeoLith();    
+    void onCloseEditGeoLith();
     void addItems_GeoLith();     //从剪切板文本数据粘贴
     void DeleteItems_GeoLith();  //全部清空
     void RefreshItems_GeoLith(); //刷新数据
@@ -605,6 +608,7 @@ public slots:
 
     //右键--编辑文字结论
     void onEditText();
+    void onCloseEditText();
     void addItems_Text();     //从剪切板文本数据粘贴
     void DeleteItems_Text();  //全部清空
     void RefreshItems_Text(); //刷新数据
@@ -612,6 +616,7 @@ public slots:
 
     //右键--编辑地质分层
     void onEditLayer();
+    void onCloseEditLayer();
     void addItems_Layer();     //从剪切板文本数据粘贴
     void DeleteItems_Layer();  //全部清空
     void RefreshItems_Layer(); //刷新数据
@@ -748,6 +753,7 @@ public:
     //单点移动功能
     void executeSingle(QMouseEvent *event);
 
+    //右键
     virtual void contextMenuEvent(QContextMenuEvent *event);
 
     QList<FRAC_TABLE> m_FracTabList;