diff --git a/logPlus/PropertyWidget.cpp b/logPlus/PropertyWidget.cpp
index a246bad..287d98e 100644
--- a/logPlus/PropertyWidget.cpp
+++ b/logPlus/PropertyWidget.cpp
@@ -3055,9 +3055,7 @@ void PropertyWidget::initProperty(FormInfo *formInfo)
 
 void PropertyWidget::initRoseProperty(FormInfo *formInfo)
 {
-	//
 	_CreateVariantPropertyItem("数据", "名称", formInfo->m_strAliasName, QVariant::String);
-
 	QStringList listType;
 	listType.append("曲线型数据");
 	listType.append("表格型数据");
@@ -3066,7 +3064,22 @@ void PropertyWidget::initRoseProperty(FormInfo *formInfo)
 	_CreateVariantPropertyItem("数据", "井文件名称", m_strSlfName, QVariant::String);
 	_CreateVariantPropertyItem("数据", "方位曲线", "STRDIR", QVariant::String);
 	_CreateVariantPropertyItem("数据", "倾角曲线", "CALM", QVariant::String);
-	//
+
+    _CreateVariantPropertyItem("通常", "例区高度(cm)", 36, QVariant::Int);
+
+    _CreateVariantPropertyItem("表数据", "深度字段", m_strSlfName, QVariant::String);
+    _CreateVariantPropertyItem("表数据", "方位字段", m_strSlfName, QVariant::String);
+    _CreateVariantPropertyItem("表数据", "倾角字段", m_strSlfName, QVariant::String);
+    _CreateVariantPropertyItem("表数据", "属性字段", m_strSlfName, QVariant::String);
+
+    _CreateVariantPropertyItem("控制曲线", "曲线名", m_strSlfName, QVariant::String);
+    _CreateVariantPropertyItem("控制曲线", "最大值", m_strSlfName, QVariant::Double);
+    _CreateVariantPropertyItem("控制曲线", "最小值", m_strSlfName, QVariant::Double);
+
+    _CreateVariantPropertyItem("字体", "名称", 36, QVariant::Font);
+    _CreateVariantPropertyItem("字体", "单位", 36, QVariant::Font);
+    _CreateVariantPropertyItem("字体", "刻度", 36, QVariant::Font);
+
 	_CreateVariantPropertyItem("玫瑰图", "扇形", 36, QVariant::Int);
 	_CreateVariantPropertyItem("玫瑰图", "圆半径(cm)", 1, QVariant::Int);
 	_CreateVariantPropertyItem("玫瑰图", "辐射圈", 9, QVariant::Int);
@@ -3079,8 +3092,28 @@ void PropertyWidget::initRoseProperty(FormInfo *formInfo)
 	_CreateVariantPropertyItem("玫瑰图", "绘制井眼垮塌", true, QVariant::Bool);
 	_CreateVariantPropertyItem("玫瑰图", "是否填充", true, QVariant::Bool);
 	_CreateVariantPropertyItem("玫瑰图", "是否绘制标注？", true, QVariant::Bool);
-//	_CreateVariantPropertyItem("玫瑰图", "道头字体", fromTop->m_font, QVariant::Font);
-//	_CreateVariantPropertyItem("玫瑰图", "道头字颜色", fromTop->m_fontColor, QVariant::Color);
+
+    _CreateVariantPropertyItem("统计参数", "统计间隔", 36, QVariant::Int);
+    _CreateVariantPropertyItem("统计参数", "最小倾角", 36, QVariant::Int);
+    _CreateVariantPropertyItem("统计参数", "最大倾角", 36, QVariant::Int);
+
+    _CreateVariantPropertyItem("分类", "高导缝", formInfo->m_pl_highGap, QVariant::Bool);
+    _CreateVariantPropertyItem("分类", "高阻缝", formInfo->m_pl_highReservoir, QVariant::Bool);
+    _CreateVariantPropertyItem("分类", "网状缝", formInfo->m_pl_reticularFracture, QVariant::Bool);
+    _CreateVariantPropertyItem("分类", "诱导缝", formInfo->m_pl_inducedFracture, QVariant::Bool);
+    _CreateVariantPropertyItem("分类", "层理", formInfo->m_pl_bedLayer, QVariant::Bool);
+    _CreateVariantPropertyItem("分类", "侵蚀面", formInfo->m_pl_erosionSurface, QVariant::Bool);
+    _CreateVariantPropertyItem("分类", "孔洞", formInfo->m_pl_pore, QVariant::Bool);
+    _CreateVariantPropertyItem("分类", "气孔", formInfo->m_pl_vesicle, QVariant::Bool);
+    _CreateVariantPropertyItem("分类", "砾石", formInfo->m_pl_gravel, QVariant::Bool);
+    _CreateVariantPropertyItem("分类", "结核", formInfo->m_pl_nodule, QVariant::Bool);
+    _CreateVariantPropertyItem("分类", "团块", formInfo->m_pl_lumps, QVariant::Bool);
+    _CreateVariantPropertyItem("分类", "断层", formInfo->m_pl_fault, QVariant::Bool);
+    _CreateVariantPropertyItem("分类", "垂直缝", formInfo->m_pl_verticalFracture, QVariant::Bool);
+    _CreateVariantPropertyItem("分类", "自定义1", formInfo->m_pl_custom1, QVariant::Bool);
+    _CreateVariantPropertyItem("分类", "自定义2", formInfo->m_pl_custom2, QVariant::Bool);
+
+    m_strCurrentProperty = PL_OBJECT_PROPERTY;
 }
 
 void PropertyWidget::initWaveProperty(FormInfo *formInfo, int nType)
@@ -4352,6 +4385,8 @@ void PropertyWidget::changedPlObjectProperty(QString strProperty, QVariant varVa
         variantMap["m_pl_minInclination"] = this->m_formInfo->m_pl_minInclination;
         variantMap["m_pl_maxInclination"] = this->m_formInfo->m_pl_maxInclination;
 
+        variantMap["m_strUuid"] = this->m_formInfo->m_strUuid;
+        variantMap["m_strTrackName"] = this->m_formInfo->m_strTrackName;
         emit CallManage::getInstance()->sig_changePlObjectProperty(variantMap);
     }
 }
diff --git a/logPlus/PropertyWidget.h b/logPlus/PropertyWidget.h
index ed4d4be..572804c 100644
--- a/logPlus/PropertyWidget.h
+++ b/logPlus/PropertyWidget.h
@@ -45,14 +45,13 @@
 #define Gujing_Property         "Gujing_Property"           //固井结论
 #define GujingItem_Property     "GujingItem_Property"       //固井item
 
-#define Image_Property         "Image_Property"           // 岩心图片
-#define ImageItem_Property     "ImageItem_Property"       // 岩心图片item
-
+#define Depth_Property         "Depth_Property"           // 深度
 #define CORE_PHYSICS_PROPERTY         "CORE_PHYSICS_PROPERTY"           // 岩心分析
 #define CORE_PHYSICS_ITEM_PROPERTY     "CORE_PHYSICS_ITEM_PROPERTY"       // 岩心分析item
-
-#define Depth_Property         "Depth_Property"           // 深度
+#define Image_Property         "Image_Property"           // 岩心图片
+#define ImageItem_Property     "ImageItem_Property"       // 岩心图片item
 #define PL_OBJECT_PROPERTY         "PL_OBJECT_PROPERTY"           // 频率统计图
+#define ROSE_OBJECT_PROPERTY         "ROSE_OBJECT_PROPERTY"           // 玫瑰图
 
 #define SwallCore_Property      "SwallCore_Property"        //井壁取心
 #define SwallCoreItem_Property  "SwallCoreItem_Property"    //井壁取心item
@@ -176,8 +175,7 @@ public:
 	void initTableProperty(FormInfo *formInfo);
 
 	void initProperty(FormInfo *formInfo);
-	// 玫瑰图属性
-	void initRoseProperty(FormInfo *formInfo);
+
 	// 波列属性
 	void initWaveProperty(FormInfo *formInfo, int nType = 3);
 
@@ -225,16 +223,6 @@ public:
     //处理通用属性
     void CommonPropertyChanged(QtProperty *pProperty, const QVariant &variant);
 
-    // 频率统计图
-    void initPlObjectProperty(FormInfo *formInfo);
-    void changedPlObjectProperty(QString strProName, QVariant val);
-
-    // 岩心照片 属性
-    void initImageProperty(FormInfo *formInfo);
-    void initImageItemProperty(TransparentDraggableImage* tdImage, double lower, double upper, QString strResult, double left, double width, QColor borderColor, Qt::PenStyle borderStyle, int borderWidth);
-    void changedYxzpProperty(QtProperty *pProperty, const QVariant &variant);
-    void changedYxzpItemProperty(QtProperty *pProperty, const QVariant &variant);
-
     // 深度
     void initDepthProperty(FormInfo *formInfo);
     void changedDepthProperty(QString strProName, QVariant val);
@@ -244,6 +232,19 @@ public:
     void initCorePhysicsItemProperty(TransparentDraggableCorePhysics* tdImage);
     void changedCorePhysicsProperty(QtProperty *pProperty, const QVariant &variant, bool isItem = false);
 
+    // 岩心照片 属性
+    void initImageProperty(FormInfo *formInfo);
+    void initImageItemProperty(TransparentDraggableImage* tdImage, double lower, double upper, QString strResult, double left, double width, QColor borderColor, Qt::PenStyle borderStyle, int borderWidth);
+    void changedYxzpProperty(QtProperty *pProperty, const QVariant &variant);
+    void changedYxzpItemProperty(QtProperty *pProperty, const QVariant &variant);
+
+    // 频率统计图
+    void initPlObjectProperty(FormInfo *formInfo);
+    void changedPlObjectProperty(QString strProName, QVariant val);
+
+    // 玫瑰图
+    void initRoseProperty(FormInfo *formInfo);
+
 public slots:
     void SlotPropertyChanged(QtProperty *property, const QVariant &variant);
 	void SlotPropertyChanged(QtProperty *property, const int &val, bool islinestyle);
diff --git a/logPlus/forminfo.h b/logPlus/forminfo.h
index 7d9f3cd..90006ea 100644
--- a/logPlus/forminfo.h
+++ b/logPlus/forminfo.h
@@ -273,7 +273,7 @@ public:
     int     m_pl_statInterval = 10;      // 统计间隔
     double  m_pl_minInclination = 0;    // 最小倾角
     double  m_pl_maxInclination = 90;    // 最大倾角
-    // 地质要素分类开关
+    // 分类(频率统计图、玫瑰图)
     bool    m_pl_highGap = false;           // 高导缝
     bool    m_pl_highReservoir = false;     // 高阻缝
     bool    m_pl_reticularFracture = false; // 网状缝
@@ -290,6 +290,9 @@ public:
     bool m_pl_custom1 = false;           // 自定义1
     bool m_pl_custom2 = false;           // 自定义2
 
+    // 玫瑰图
+    // 玫瑰图变量
+
     int cpLineWidth() const;
     void setCpLineWidth(int cpLineWidth);
 
diff --git a/logPlus/formwell.cpp b/logPlus/formwell.cpp
index 71d0cfa..c094be7 100644
--- a/logPlus/formwell.cpp
+++ b/logPlus/formwell.cpp
@@ -139,6 +139,8 @@ QVector<QWidget *> FormWell::new_track(QStringList listdt, QString strTrackName)
             strTrackName = "DCA检测";
         else if(strType == "tdtObject")
             strTrackName = "TDT";
+        else if(strType == "plObject")
+            strTrackName = "频率统计图" + QString::number(columnCount+1);
         else{
             strTrackName = "道" + QString::number(columnCount+1);
         }
diff --git a/logPlus/qmycustomplot.cpp b/logPlus/qmycustomplot.cpp
index 34edd2c..abf537c 100644
--- a/logPlus/qmycustomplot.cpp
+++ b/logPlus/qmycustomplot.cpp
@@ -10035,6 +10035,11 @@ void QMyCustomPlot::resetPosition()
 
 void QMyCustomPlot::s_changePlObjectProperty(QVariantMap variantMap)
 {
+    QString strTrackName = variantMap["m_strTrackName"].toString();
+    if(this->m_strTrackName != strTrackName)
+    {
+        return;
+    }
     QString csCurveGrad = variantMap["m_pl_controlCurveName"].toString();
     double LeftVal3 = variantMap["m_pl_controlMinValue"].toDouble();
     double RightVal3 = variantMap["m_pl_controlMaxValue"].toDouble();
@@ -10065,6 +10070,7 @@ void QMyCustomPlot::s_changePlObjectProperty(QVariantMap variantMap)
     double minInclination = variantMap["m_pl_minInclination"].toDouble();
     double maxInclination = variantMap["m_pl_maxInclination"].toDouble();
 
+
     this->fgrqDraw(csCurveGrad, LeftVal3, RightVal3, nArc, nR, crArc, nArcLineWidth, bFill, crFill,
                    lineNumber, lineHeight, lineThickness, lineColor, drawAnnotation, drawHistogram, baselineWidth,
                    baselineColor, statInterval, minInclination, maxInclination);
@@ -10130,7 +10136,7 @@ void QMyCustomPlot::fgrqDraw(QString csCurveGrad, double LeftVal3, double RightV
     float flDep = tmp * nstep;
 
     m_Curve.DepLevel = 0.5;
-    while ( 1)
+    while (1)
     {
         if((flDep>=ftmpEdep+nstep)||flDep>=ftmpEdep)break;
 
@@ -10329,8 +10335,8 @@ void QMyCustomPlot::fgrqDraw(QString csCurveGrad, double LeftVal3, double RightV
 }
 
 void QMyCustomPlot::drawDipAngle(double centerX, double centerY, float ifdir[360], int iIndex, float dirmax,
-int lineNumber, double lineHeight, int lineThickness, QColor lineColor, bool drawHistogram,
-int baselineWidth, QColor baselineColor, double minInclination, double maxInclination)
+                                int lineNumber, double lineHeight, int lineThickness, QColor lineColor, bool drawHistogram,
+                                int baselineWidth, QColor baselineColor, double minInclination, double maxInclination)
 {
     double startX =  centerX + 400;
     double startY = centerY - 5;
diff --git a/logPlus/qmycustomplot.h b/logPlus/qmycustomplot.h
index 62e9e02..69ef4c6 100644
--- a/logPlus/qmycustomplot.h
+++ b/logPlus/qmycustomplot.h
@@ -642,8 +642,8 @@ public:
                   int baselineWidth, QColor baselineColor, int nstep, double minInclination, double maxInclination);
     // 绘制倾角
     void drawDipAngle(double centerX, double centerY, float ifdir[360], int iIndex, float dirmax,
-    int lineNumber, double lineHeight, int lineThickness, QColor lineColor, bool drawHistogram,
-    int baselineWidth, QColor baselineColor, double minInclination, double maxInclination);
+                    int lineNumber, double lineHeight, int lineThickness, QColor lineColor, bool drawHistogram,
+                    int baselineWidth, QColor baselineColor, double minInclination, double maxInclination);
 
     void Refurbish();