diff --git a/logPlus/CallManage.h b/logPlus/CallManage.h
index b25e535..b4be646 100644
--- a/logPlus/CallManage.h
+++ b/logPlus/CallManage.h
@@ -188,6 +188,9 @@ signals:
     //改变深度
     void sig_changeDepth(QString strUuid, QString strSlfName, QString strWellName, int iY1, int iY2);
 
+    //修改滚动条，针对新建的
+    void sig_changeScrollBar(QString strUuid);
+
 	void sig_changeWellProperty(QString strSlfName, QString strWellName, QVariantList listVal);
 
     //改变道宽
@@ -218,16 +221,39 @@ signals:
     void sig_AddShiftLine(QString strUuid, double left_Low, double right_Hight);
     //校深线段
     void sig_AddShifLineToPlot(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, double left_Low, double right_Hight);
+    //校深(主校补充线段)
+    void sig_AddShiftLine_Master(QString strUuid, double left_Low, double right_Hight, QString strUuid_biaozhun);
+    //校深线段(主校补充线段)
+    void sig_AddShifLineToPlot_Master(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, double left_Low, double right_Hight, QString strUuid_biaozhun);
+    //校准线段移动
+    void sig_MoveLine_Jiaozhun(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, double left_Low, double right_Hight, QString strUuid_biaozhun);
+    //校准线段颜色(重新选中)
+    void sig_ChangeLineColor_Jiaozhun(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, QString strUuid_biaozhun);
+    //补充线段颜色(重新选中)
+    void sig_ChangeLineColor_Master(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, QString strUuid_biaozhun);
 
     //右键--清除当前分段线
     void sig_DelSelectShiftLine(QString strUuid);
     //清除当前分段线
-    void sig_DelSelectShiftLineFromPlot(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName);
+    void sig_DelSelectShiftLineFromPlot(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, QString strTrackName_Right, QString strLineName_Right);
+    //清除当前分段线
+    void sig_DelSelectShiftLineFromPlot_Master(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, QString strUuid_biaozhun);
 
     //右键--清除全部分段线
     void sig_DelAllShiftLine(QString strUuid);
     //清除全部分段线
     void sig_DelAllShiftLineFromPlot(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName);
+    //清除全部分段线
+    void sig_DelAllShiftLineFromPlot_Master(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName);
+
+    //校准曲线拖动后，通知补充线段移动
+    void sig_ChangeRange_Master(QString strUuid, double left_Low, double right_Hight, QString strUuid_biaozhun);
+    //补充曲线拖动后，通知校准线段移动
+    void sig_ChangeRange_Jiaozhun(QString strUuid, double left_Low, double right_Hight, QString strUuid_biaozhun);
+    //补充曲线选中后，改变校准线段颜色(重新选中)
+    void sig_ChangeSelectShiftLineColor_Jiaozhun(QString strUuid, QString strUuid_biaozhun);
+    //校准曲线选中后，改变补充线段颜色(重新选中)
+    void sig_ChangeSelectShiftLineColor_Master(QString strUuid, QString strUuid_biaozhun);
 
     //执行校正
     void sig_RuncorFromPlot(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName);
diff --git a/logPlus/TransparentDraggableLine.cpp b/logPlus/TransparentDraggableLine.cpp
index 4e118c1..ed375bf 100644
--- a/logPlus/TransparentDraggableLine.cpp
+++ b/logPlus/TransparentDraggableLine.cpp
@@ -1,4 +1,5 @@
-#include "TransparentDraggableLine.h"
+#include "TransparentDraggableLine.h"
+#include "CallManage.h"
 
 extern double g_dPixelPerCm;//每厘米像素数
 //static GeoIndicatorGenerator m_drawGeo;
@@ -53,6 +54,8 @@ void TransparentDraggableLine::setRange(double left_Low, double right_Hight, boo
     qcpItemLine->start->setCoords(left_Low, lY1);//圆心位置
     qcpItemLine->end->setCoords(right_Hight, lY2);//圆心位置
 
+    emit CallManage::getInstance()->sig_ChangeRange_Master(mPlot->m_strUuid, right_Hight, right_Hight, m_strUuid);
+
     //updateHandles();
     //刷新，针对批量修改不在此处刷新，后面统一刷新
     if(bReplot)
@@ -95,7 +98,7 @@ void TransparentDraggableLine::initRect()
     connect(mPlot, &QCustomPlot::mouseRelease, this, &TransparentDraggableLine::onMouseRelease);
 
     qcpItemLine = new QCPItemLine(mPlot);
-    qcpItemLine->setPen(QPen(Qt::black, 1));
+    qcpItemLine->setPen(QPen(Qt::blue, 2));
     qcpItemLine->setLayer("overlay"); // 确保在最上层
 
     //上下边界
@@ -142,12 +145,12 @@ void TransparentDraggableLine::onMousePress(QMouseEvent *event)
         {
             //之前的选中线段，恢复黑色
             TransparentDraggableLine *tmpLine = (TransparentDraggableLine*)mPlot->m_SelectShiftLine;
-            tmpLine->qcpItemLine->setPen(QPen(Qt::blue));
+            tmpLine->qcpItemLine->setPen(QPen(Qt::blue, 2));
         }
 
         //重新设置选中线段
         mPlot->m_SelectShiftLine = this;
-        qcpItemLine->setPen(QPen(Qt::red));
+        qcpItemLine->setPen(QPen(Qt::red, 2));
 
         double delta = (lY2-m_lY1)/10.0;
         if(x < m_lY1+delta)
@@ -162,6 +165,9 @@ void TransparentDraggableLine::onMousePress(QMouseEvent *event)
         {
             mDragMode = DragRect;
         }
+
+        //改变补充线段颜色(重新选中)
+        emit CallManage::getInstance()->sig_ChangeSelectShiftLineColor_Master(mPlot->m_strUuid, m_strUuid);
     }
     else {
         mDragMode = DragNone;
diff --git a/logPlus/TransparentDraggableLine_Master.cpp b/logPlus/TransparentDraggableLine_Master.cpp
new file mode 100644
index 0000000..dcdce51
--- /dev/null
+++ b/logPlus/TransparentDraggableLine_Master.cpp
@@ -0,0 +1,238 @@
+#include "TransparentDraggableLine_Master.h"
+#include "CallManage.h"
+
+extern double g_dPixelPerCm;//每厘米像素数
+//static GeoIndicatorGenerator m_drawGeo;
+
+TransparentDraggableLine_Master::TransparentDraggableLine_Master(QMyCustomPlot *parentPlot,  QString strUuid, double minWidth, QString strTitle)
+        : QObject(parentPlot), mPlot(parentPlot), mstrTitle(strTitle), mMinWidth(minWidth)
+{
+    m_strUuid = strUuid;
+    //
+    initRect();
+}
+
+TransparentDraggableLine_Master::~TransparentDraggableLine_Master()
+{
+    if(mPlot)
+    {
+    }
+}
+
+//设置最小宽度
+void TransparentDraggableLine_Master::setMinWidth(double minWidth)
+{
+    mMinWidth = minWidth;
+}
+
+//设置标题
+void TransparentDraggableLine_Master::setTitle(QString strTitle)
+{
+    mstrTitle = strTitle;
+    //mPlot->replot();
+}
+
+// 设置矩形范围
+void TransparentDraggableLine_Master::setRange(double left_Low, double right_Hight, bool bReplot)
+{
+    m_left_Low = left_Low;
+    m_right_Hight = right_Hight;
+
+    double lY1 = mPlot->yAxis->range().lower;//+10
+    double lY2 = mPlot->yAxis->range().upper;
+
+    for(int i =0; i<mPlot->m_x.size(); i++)
+    {
+        if(abs(mPlot->m_x[i]-right_Hight) < 0.1)
+        {
+            lY2 = mPlot->m_y[i];
+            break;
+        }
+    }
+    m_lY1 = lY1;
+    m_lY2 = lY2;
+
+    qcpItemLine->start->setCoords(left_Low, lY1);//圆心位置
+    qcpItemLine->end->setCoords(right_Hight, lY2);//圆心位置
+
+    emit CallManage::getInstance()->sig_ChangeRange_Jiaozhun(mPlot->m_strUuid, right_Hight, right_Hight, m_strUuid);
+
+    //updateHandles();
+    //刷新，针对批量修改不在此处刷新，后面统一刷新
+    if(bReplot)
+    {
+        mPlot->replot();
+    }
+}
+
+// 获取当前范围
+void TransparentDraggableLine_Master::getRange()
+{
+    m_left_Low = qcpItemLine->start->coords().x();
+    m_right_Hight = qcpItemLine->end->coords().x();
+}
+
+// 设置矩形颜色
+void TransparentDraggableLine_Master::setColor(const QColor &color)
+{
+}
+
+// 删除框图
+void TransparentDraggableLine_Master::deleteRect()
+{
+    if(mPlot) {
+        mPlot->m_mapDraggable_Line_Master.remove(m_strUuid);
+
+        mPlot->removeItem(qcpItemLine);
+
+        //mPlot->replot();
+        this->deleteLater();
+    }
+}
+
+
+void TransparentDraggableLine_Master::initRect()
+{
+    // 连接鼠标事件
+    connect(mPlot, &QCustomPlot::mousePress, this, &TransparentDraggableLine_Master::onMousePress);
+    connect(mPlot, &QCustomPlot::mouseMove, this, &TransparentDraggableLine_Master::onMouseMove);
+    connect(mPlot, &QCustomPlot::mouseRelease, this, &TransparentDraggableLine_Master::onMouseRelease);
+
+    qcpItemLine = new QCPItemLine(mPlot);
+    qcpItemLine->setPen(QPen(Qt::blue, 2));
+    qcpItemLine->setLayer("overlay"); // 确保在最上层
+
+    //上下边界
+    updateHandles();
+}
+
+void TransparentDraggableLine_Master::updateHandles()
+{
+
+}
+
+void TransparentDraggableLine_Master::onDelRect()
+{
+    //mDragMode = DragNone;
+    //删除框图
+    deleteRect();
+    mPlot->replot();
+}
+
+
+void TransparentDraggableLine_Master::onMousePress(QMouseEvent *event)
+{
+    if(event->button() != Qt::LeftButton)//右键
+    {
+//        QMenu menu(nullptr);
+//        QAction *delAction = menu.addAction("删除框图");
+//        connect(delAction, &QAction::triggered, this, &TransparentDraggableLine_Master::onDelRect);
+
+//        menu.exec(event->globalPos());
+//        return;
+    }
+
+    event->accept();
+
+    // 检查点击了哪个部分
+    double y = mPlot->xAxis->pixelToCoord(event->pos().y());//x轴展示深度
+    double x = mPlot->yAxis->pixelToCoord(event->pos().x());
+    //double lY1 = mPlot->yAxis->range().lower;//+10
+    //double lY2 = mPlot->yAxis->range().upper;
+
+    if(qcpItemLine->selectTest(event->pos(), false) < 5)
+    {
+        if(mPlot->m_SelectShiftLine)
+        {
+            //之前的选中线段，恢复黑色
+            TransparentDraggableLine_Master *tmpLine = (TransparentDraggableLine_Master*)mPlot->m_SelectShiftLine;
+            tmpLine->qcpItemLine->setPen(QPen(Qt::blue, 2));
+        }
+
+        //重新设置选中线段
+        mPlot->m_SelectShiftLine = this;
+        qcpItemLine->setPen(QPen(Qt::red, 2));
+        //
+        double delta = (m_lY2-m_lY1)/10.0;
+        if(x < m_lY1+delta)
+        {
+            mDragMode = DragLeft;
+        }
+        else if(x > m_lY2-delta)
+        {
+            mDragMode = DragRight;
+        }
+        else
+        {
+            mDragMode = DragRect;
+        }
+
+        //改变校准线段颜色(重新选中)
+        emit CallManage::getInstance()->sig_ChangeSelectShiftLineColor_Jiaozhun(mPlot->m_strUuid, m_strUuid);
+    }
+    else {
+        mDragMode = DragNone;
+        return;
+    }
+
+    getRange();
+
+    mDragStartY = y;
+}
+
+void TransparentDraggableLine_Master::onMouseMove(QMouseEvent *event)
+{
+    if(mDragMode == DragNone) return;
+
+    event->accept();
+
+    //double x = mPlot->xAxis->pixelToCoord(event->pos().x());
+    //double dx = x - mDragStartX;
+
+    double y = mPlot->xAxis->pixelToCoord(event->pos().y());
+    double dy = y - mDragStartY;
+    mDragStartY = y;
+
+    switch(mDragMode) {
+    case DragLeft: {
+        m_left_Low = m_left_Low + dy;
+        m_right_Hight = m_right_Hight + dy;//追加的
+        break;
+    }
+    case DragRight: {
+        m_left_Low = m_left_Low + dy;//追加的
+        m_right_Hight = m_right_Hight + dy;
+        break;
+    }
+    case DragRect: {
+        m_left_Low = m_left_Low + dy;
+        m_right_Hight = m_right_Hight + dy;
+        break;
+    }
+    default:
+        break;
+    }
+
+    setRange(m_left_Low, m_right_Hight);
+}
+
+void TransparentDraggableLine_Master::onMouseRelease(QMouseEvent *event)
+{
+    if(event->button() == Qt::LeftButton && mDragMode != DragNone) {
+        event->accept();
+        //避免二次绘制框图
+        mPlot->m_bDrawRect = false;
+        //emit rangeChanged(getRange());
+        mDragMode = DragNone;
+        //取消选中状态
+//            QCPDataSelection emptySelection;
+//            mPlot->graph(0)->setSelection(emptySelection);
+//            mPlot->replot();
+
+        //取消选中框
+        mPlot->selectionRect()->cancel();
+        mPlot->replot();
+        mPlot->selectionRect()->mActive=true;
+    }
+}
+
diff --git a/logPlus/TransparentDraggableLine_Master.h b/logPlus/TransparentDraggableLine_Master.h
new file mode 100644
index 0000000..15c741d
--- /dev/null
+++ b/logPlus/TransparentDraggableLine_Master.h
@@ -0,0 +1,71 @@
+#ifndef TransparentDraggableLine_Master_MAATSR_H
+#define TransparentDraggableLine_Master_MAATSR_H
+ 
+#include <QObject>
+#include "qmycustomplot.h"
+#include <QString>
+#include <QMenu>
+ 
+#pragma execution_character_set("utf-8")  // 强制指定执行字符集为 UTF-8
+ 
+//曲线校深--线段
+class TransparentDraggableLine_Master : public QObject
+{
+    Q_OBJECT
+public:
+    explicit TransparentDraggableLine_Master(QMyCustomPlot *parentPlot,  QString strUuid="", double minWidth = 1.0, QString strTitle = "");
+
+ 
+    ~TransparentDraggableLine_Master();
+ 
+    //设置最小宽度
+    void setMinWidth(double minWidth);
+    //设置标题
+    void setTitle(QString strTitle);
+ 
+    // 设置矩形范围
+    void setRange(double left_Low, double right_Hight, bool bReplot=true);
+    // 获取当前范围
+    void getRange();
+ 
+    // 设置矩形颜色
+    void setColor(const QColor &color);
+ 
+    // 删除框图
+    void deleteRect();
+
+signals:
+    void rangeChanged(QCPRange newRange);
+ 
+private:
+    void initRect(); 
+    void updateHandles() ;
+ 
+private slots:
+    void onDelRect();
+    void onMousePress(QMouseEvent *event);
+    void onMouseMove(QMouseEvent *event);
+    void onMouseRelease(QMouseEvent *event);
+    
+public:
+    QMyCustomPlot *mPlot;
+ 
+    QCPItemLine *qcpItemLine;
+    QString mstrTitle="";
+    QString m_strUuid = "";
+
+    enum DragMode { DragNone, DragLeft, DragRight, DragRect };
+    DragMode mDragMode = DragNone;
+    //double mDragStartX = 0;
+    double mDragStartY = 0;
+
+    double m_left_Low = 0;
+    double m_right_Hight = 0;
+    double m_lY1 = 0;
+    double m_lY2 = 0;
+
+    // 添加最小宽度成员变量
+    double mMinWidth;
+};
+ 
+#endif // TransparentDraggableLine_Master_MAATSR_H
diff --git a/logPlus/formdraw.cpp b/logPlus/formdraw.cpp
index b430a31..4a1cd2b 100644
--- a/logPlus/formdraw.cpp
+++ b/logPlus/formdraw.cpp
@@ -3900,7 +3900,7 @@ void FormDraw::s_addGanZhuangTu(QString strUuid, QString strSlfName, QString str
     QMyCustomPlot *curv = new QMyCustomPlot(this, strSlfName, strWellName, strTrackName, strLineName);
     //绑定m_formTrack，方便关联formInfo
     curv->m_formTrack = m_formTrack;
-    curv->m_strUuid = m_strUuid;
+    //curv->m_strUuid = m_strUuid;
 	curv->setDepthY(m_iY1, m_iY2);
 	curv->initGeometry(m_strUuid, m_iScale, g_iOneWidth);
     curv->show();
@@ -4091,6 +4091,10 @@ FormLine* FormDraw::s_addSantuyibiao(QString strUuid, QString strSlfName, QStrin
     m_formTrack->Add(strSlfName, m_strWellName, m_strTrackName, strLineName, strAliasName, strUnit, newlineColor, width, _nSamples, 0, strScaleType, "SantuyibiaoObject");
     emit CallManage::getInstance()->sig_ChangeTvdProperty(m_strUuid, m_strSlfName, m_strWellName, m_strTrackName, "Santuyibiao",
                                                        (QObject *)(curv->m_drawTvd));
+
+    //修改滚动条，针对新建的
+    emit CallManage::getInstance()->sig_changeScrollBar(m_strUuid);
+
     return curv;
 }
 
@@ -4393,7 +4397,7 @@ void FormDraw::s_addMCals(QString strUuid, QString strSlfName, QString strWellNa
     QMyCustomPlot *curv = new QMyCustomPlot(this, strSlfName, strWellName, strTrackName, strLineName);
     //绑定m_formTrack，方便关联formInfo
     curv->m_formTrack = m_formTrack;
-    curv->m_strUuid = m_strUuid;
+    //curv->m_strUuid = m_strUuid;
     curv->setDepthY(m_iY1, m_iY2);
     curv->initGeometry(m_strUuid, m_iScale, g_iOneWidth);
     curv->show();
diff --git a/logPlus/logPlus.pro b/logPlus/logPlus.pro
index 92de8ed..fb4c612 100644
--- a/logPlus/logPlus.pro
+++ b/logPlus/logPlus.pro
@@ -51,6 +51,7 @@ SOURCES += \
         TransparentDraggableJiegutext.cpp \
         TransparentDraggableLayer.cpp \
         TransparentDraggableLine.cpp \
+        TransparentDraggableLine_Master.cpp \
         TransparentDraggableMFac.cpp \
         TransparentDraggablePhase.cpp \
         TransparentDraggableRect.cpp \
@@ -119,6 +120,7 @@ HEADERS += \
         TransparentDraggableJiegutext.h \
         TransparentDraggableLayer.h \
         TransparentDraggableLine.h \
+        TransparentDraggableLine_Master.h \
         TransparentDraggableMFac.h \
         TransparentDraggablePhase.h \
         TransparentDraggableRect.h \
diff --git a/logPlus/mainwindowcurve.cpp b/logPlus/mainwindowcurve.cpp
index 632422c..e332892 100644
--- a/logPlus/mainwindowcurve.cpp
+++ b/logPlus/mainwindowcurve.cpp
@@ -119,6 +119,7 @@ MainWindowCurve::MainWindowCurve(QWidget *parent) :
     ui->verticalScrollBar->setRange(-m_iY2, -m_iY1);
     ui->verticalScrollBar->setValue(-m_iY2);
     connect(ui->verticalScrollBar, SIGNAL(valueChanged(int)), this, SLOT(vertScrollBarChanged(int)));
+    connect(CallManage::getInstance(), SIGNAL(sig_changeScrollBar(QString)), this, SLOT(s_changeScrollBar(QString)));
 
     connect(this, SIGNAL(sig_NewTrackChangeWidth(QString, double)), this, SLOT(s_NewTrackChangeWidth(QString, double)));
     //connect(this, SIGNAL(sig_NewWell(QString, QString)), this, SLOT(s_NewWell(QString, QString)));
@@ -135,11 +136,22 @@ MainWindowCurve::MainWindowCurve(QWidget *parent) :
     connect(CallManage::getInstance(), SIGNAL(sig_Raise(QString, QString, QString, QString, QString, int, QString)), this, SLOT(s_Raise(QString, QString, QString, QString, QString, int, QString)));
     //右键--添加分段线
     connect(CallManage::getInstance(), SIGNAL(sig_AddShiftLine(QString, double, double)), this, SLOT(s_AddShiftLine(QString, double, double)));
+    //右键--添加分段线
+    connect(CallManage::getInstance(), SIGNAL(sig_AddShiftLine_Master(QString, double, double, QString)), this, SLOT(s_AddShiftLine_Master(QString, double, double, QString)));
     //右键--清除当前分段线
     connect(CallManage::getInstance(), SIGNAL(sig_DelSelectShiftLine(QString)), this, SLOT(s_DelSelectShiftLine(QString)));
     //右键--清除全部分段线
     connect(CallManage::getInstance(), SIGNAL(sig_DelAllShiftLine(QString)), this, SLOT(s_DelAllShiftLine(QString)));
 
+    //校准曲线拖动后，通知补充线段移动
+    connect(CallManage::getInstance(), SIGNAL(sig_ChangeRange_Master(QString, double, double, QString)), this, SLOT(s_ChangeRange_Master(QString, double, double, QString)));
+    //补充曲线拖动后，通知校准线段移动
+    connect(CallManage::getInstance(), SIGNAL(sig_ChangeRange_Jiaozhun(QString, double, double, QString)), this, SLOT(s_ChangeRange_Jiaozhun(QString, double, double, QString)));
+    //补充曲线选中后，改变校准线段颜色(重新选中)
+    connect(CallManage::getInstance(), SIGNAL(sig_ChangeSelectShiftLineColor_Jiaozhun(QString, QString)), this, SLOT(s_ChangeSelectShiftLineColor_Jiaozhun(QString, QString)));
+    //校准曲线选中后，改变补充线段颜色(重新选中)
+    connect(CallManage::getInstance(), SIGNAL(sig_ChangeSelectShiftLineColor_Master(QString, QString)), this, SLOT(s_ChangeSelectShiftLineColor_Master(QString, QString)));
+
     //执行校正
     connect(CallManage::getInstance(), SIGNAL(sig_Runcor_List(QString, QList<double>, QList<double>)), this, SLOT(s_Runcor_List(QString, QList<double>, QList<double>)));
 
@@ -332,8 +344,8 @@ void MainWindowCurve::initMainToolBar()
     ui->mainToolBar->addAction(m_fixwellsectionHeaderAc);
     //ui->mainToolBar->addAction(m_currtempliteAc);
     ui->mainToolBar->addAction(m_saveastemplateAc);
-    //ui->mainToolBar->addAction(m_executeDepthShiftAc);
-    //ui->mainToolBar->addAction(m_joindepthAc);
+    ui->mainToolBar->addAction(m_executeDepthShiftAc);
+    ui->mainToolBar->addAction(m_joindepthAc);
     ui->mainToolBar->addAction(m_ModuleOpenAc);	
     ui->mainToolBar->addAction(m_SaveAsPictureAc);//导出长图
     ui->mainToolBar->addAction(m_SaveAsPdfAc);//导出PDF
@@ -1006,12 +1018,17 @@ void MainWindowCurve::s_Standard()
         return;
     }
 
+
     //主校（源拼接）曲线中，去掉本条曲线
     if(m_RightCurve.m_strSlfName == m_SelectTableItem.m_strSlfName &&
         m_RightCurve.m_strWellName == m_SelectTableItem.m_strWellName &&
         m_RightCurve.m_strTrackName == m_SelectTableItem.m_strTrackName &&
         m_RightCurve.m_strLineName == m_SelectTableItem.m_strLineName)
     {
+        //-------------------------------------
+        //通知界面,清除全部分段线
+        emit CallManage::getInstance()->sig_DelAllShiftLine(m_strUuid);
+
         //主校曲线中，切换为不选择
         m_RightCurve.m_iTableType=0;
         m_RightCurve.m_strUuid = "";
@@ -1042,6 +1059,10 @@ void MainWindowCurve::s_Standard()
     //当前有标准（目标拼接）曲线
     if(m_LeftCurve.m_iTableType==3 && m_LeftCurve.m_strFormInfoType=="curveObject")
     {
+        //-------------------------------------
+        //通知界面,清除全部分段线
+        emit CallManage::getInstance()->sig_DelAllShiftLine(m_strUuid);
+
         //当前已经选中为标准曲线
         if(m_LeftCurve.m_strSlfName == m_SelectTableItem.m_strSlfName &&
                 m_LeftCurve.m_strWellName == m_SelectTableItem.m_strWellName &&
@@ -1110,6 +1131,10 @@ void MainWindowCurve::s_Correction()
     //当前有标准曲线
     if(m_LeftCurve.m_iTableType==3 && m_LeftCurve.m_strFormInfoType=="curveObject")
     {
+        //-------------------------------------
+        //通知界面,清除全部分段线
+        emit CallManage::getInstance()->sig_DelAllShiftLine(m_strUuid);
+
         //当前已经选中为标准曲线
         if(m_LeftCurve.m_strSlfName == m_SelectTableItem.m_strSlfName &&
                 m_LeftCurve.m_strWellName == m_SelectTableItem.m_strWellName &&
@@ -1156,6 +1181,11 @@ void MainWindowCurve::s_Correction()
             m_RightCurve.m_strTrackName == m_SelectTableItem.m_strTrackName &&
             m_RightCurve.m_strLineName == m_SelectTableItem.m_strLineName)
         {
+
+            //-------------------------------------
+            //通知界面,清除全部分段线
+            emit CallManage::getInstance()->sig_DelAllShiftLine(m_strUuid);
+
             //修改当前曲线选择状态 iSelect=0未知
             emit CallManage::getInstance()->sig_ChangeLineStatus(m_strUuid, m_SelectTableItem.m_strSlfName, m_SelectTableItem.m_strWellName, m_SelectTableItem.m_strTrackName, m_SelectTableItem.m_strLineName, 0, m_bMerge);
 
@@ -1256,6 +1286,144 @@ void MainWindowCurve::s_AddShiftLine(QString strUuid, double left_Low, double ri
     emit CallManage::getInstance()->sig_AddShifLineToPlot(m_strUuid, m_LeftCurve.m_strSlfName, m_LeftCurve.m_strWellName, m_LeftCurve.m_strTrackName, m_LeftCurve.m_strLineName, left_Low, right_Hight);
 }
 
+//校深(主校补充线段)
+void MainWindowCurve::s_AddShiftLine_Master(QString strUuid, double left_Low, double right_Hight, QString strUuid_biaozhun)
+{
+    if(strUuid != m_strUuid)
+    {
+        return;
+    }
+
+    //当前有标准曲线
+    if(m_LeftCurve.m_iTableType==3 && m_LeftCurve.m_strFormInfoType=="curveObject")
+    {
+    }
+    else
+    {
+        QMessageBox::warning(this, "提示", "请先选择标准曲线!");
+        return;
+    }
+
+    //当前有主校曲线
+    if(m_RightCurve.m_iTableType==3 && m_RightCurve.m_strFormInfoType=="curveObject")
+    {
+    }
+    else
+    {
+        QMessageBox::warning(this, "提示", "请先选择校正曲线!");
+        return;
+    }
+
+    //通知界面,增加一条(主校补充线段)
+    emit CallManage::getInstance()->sig_AddShifLineToPlot_Master(m_strUuid, m_RightCurve.m_strSlfName, m_RightCurve.m_strWellName, m_RightCurve.m_strTrackName, m_RightCurve.m_strLineName, left_Low, right_Hight, strUuid_biaozhun);
+}
+
+//校准曲线拖动后，通知补充线段移动
+void MainWindowCurve::s_ChangeRange_Master(QString strUuid, double left_Low, double right_Hight, QString strUuid_biaozhun)
+{
+    if(strUuid != m_strUuid)
+    {
+        return;
+    }
+
+    //当前有标准曲线
+    if(m_LeftCurve.m_iTableType==3 && m_LeftCurve.m_strFormInfoType=="curveObject")
+    {
+    }
+    else
+    {
+        QMessageBox::warning(this, "提示", "请先选择标准曲线!");
+        return;
+    }
+
+    //当前有主校曲线
+    if(m_RightCurve.m_iTableType==3 && m_RightCurve.m_strFormInfoType=="curveObject")
+    {
+    }
+    else
+    {
+        QMessageBox::warning(this, "提示", "请先选择校正曲线!");
+        return;
+    }
+
+    //通知界面,增加一条(主校补充线段)
+    emit CallManage::getInstance()->sig_AddShifLineToPlot_Master(m_strUuid, m_RightCurve.m_strSlfName, m_RightCurve.m_strWellName, m_RightCurve.m_strTrackName, m_RightCurve.m_strLineName, left_Low, right_Hight, strUuid_biaozhun);
+}
+
+//补充曲线拖动后，通知校准线段移动
+void MainWindowCurve::s_ChangeRange_Jiaozhun(QString strUuid, double left_Low, double right_Hight, QString strUuid_biaozhun)
+{
+    if(strUuid != m_strUuid)
+    {
+        return;
+    }
+
+    //当前有标准曲线
+    if(m_LeftCurve.m_iTableType==3 && m_LeftCurve.m_strFormInfoType=="curveObject")
+    {
+    }
+    else
+    {
+        QMessageBox::warning(this, "提示", "请先选择标准曲线!");
+        return;
+    }
+
+    //通知界面,校准线段移动
+    emit CallManage::getInstance()->sig_MoveLine_Jiaozhun(m_strUuid, m_LeftCurve.m_strSlfName, m_LeftCurve.m_strWellName, m_LeftCurve.m_strTrackName, m_LeftCurve.m_strLineName, left_Low, right_Hight, strUuid_biaozhun);
+}
+
+//补充曲线选中后，改变校准线段颜色(重新选中)
+void MainWindowCurve::s_ChangeSelectShiftLineColor_Jiaozhun(QString strUuid, QString strUuid_biaozhun)
+{
+    if(strUuid != m_strUuid)
+    {
+        return;
+    }
+
+    //当前有标准曲线
+    if(m_LeftCurve.m_iTableType==3 && m_LeftCurve.m_strFormInfoType=="curveObject")
+    {
+    }
+    else
+    {
+        QMessageBox::warning(this, "提示", "请先选择标准曲线!");
+        return;
+    }
+
+    //通知界面,改变校准线段颜色(重新选中)
+    emit CallManage::getInstance()->sig_ChangeLineColor_Jiaozhun(m_strUuid, m_LeftCurve.m_strSlfName, m_LeftCurve.m_strWellName, m_LeftCurve.m_strTrackName, m_LeftCurve.m_strLineName, strUuid_biaozhun);
+}
+
+//校准曲线选中后，改变补充线段颜色(重新选中)
+void MainWindowCurve::s_ChangeSelectShiftLineColor_Master(QString strUuid, QString strUuid_biaozhun)
+{
+    if(strUuid != m_strUuid)
+    {
+        return;
+    }
+
+    //当前有标准曲线
+    if(m_LeftCurve.m_iTableType==3 && m_LeftCurve.m_strFormInfoType=="curveObject")
+    {
+    }
+    else
+    {
+        QMessageBox::warning(this, "提示", "请先选择标准曲线!");
+        return;
+    }
+    //当前有主校曲线
+    if(m_RightCurve.m_iTableType==3 && m_RightCurve.m_strFormInfoType=="curveObject")
+    {
+    }
+    else
+    {
+        QMessageBox::warning(this, "提示", "请先选择校正曲线!");
+        return;
+    }
+    //通知界面,改变补充线段颜色(重新选中)
+    emit CallManage::getInstance()->sig_ChangeLineColor_Master(m_strUuid, m_RightCurve.m_strSlfName, m_RightCurve.m_strWellName, m_RightCurve.m_strTrackName, m_RightCurve.m_strLineName, strUuid_biaozhun);
+}
+
 //右键--清除当前分段线
 void MainWindowCurve::s_DelSelectShiftLine(QString strUuid)
 {
@@ -1274,18 +1442,25 @@ void MainWindowCurve::s_DelSelectShiftLine(QString strUuid)
         return;
     }
 
-//    //当前有主校曲线
-//    if(m_RightCurve.m_iTableType==3 && m_RightCurve.m_strFormInfoType=="curveObject")
-//    {
-//    }
-//    else
-//    {
+    //当前有主校曲线
+    if(m_RightCurve.m_iTableType==3 && m_RightCurve.m_strFormInfoType=="curveObject")
+    {
+        //不在此处删除，在删除标准曲线的内部处理
+        //通知界面,清除当前分段线
+        emit CallManage::getInstance()->sig_DelSelectShiftLineFromPlot(m_strUuid,
+                                                                      m_LeftCurve.m_strSlfName, m_LeftCurve.m_strWellName, m_LeftCurve.m_strTrackName, m_LeftCurve.m_strLineName,
+                                                                      m_RightCurve.m_strTrackName, m_RightCurve.m_strLineName);
+    }
+    else
+    {
+        //通知界面,清除当前分段线
+        emit CallManage::getInstance()->sig_DelSelectShiftLineFromPlot(m_strUuid,
+                                                                       m_LeftCurve.m_strSlfName, m_LeftCurve.m_strWellName, m_LeftCurve.m_strTrackName, m_LeftCurve.m_strLineName,
+                                                                       "", "");
+
 //        QMessageBox::warning(this, "提示", "请先选择校正曲线!");
 //        return;
-//    }
-
-    //通知界面,清除当前分段线
-    emit CallManage::getInstance()->sig_DelSelectShiftLineFromPlot(m_strUuid, m_LeftCurve.m_strSlfName, m_LeftCurve.m_strWellName, m_LeftCurve.m_strTrackName, m_LeftCurve.m_strLineName);
+    }
 }
 
 //右键--清除全部分段线
@@ -1306,18 +1481,20 @@ void MainWindowCurve::s_DelAllShiftLine(QString strUuid)
         return;
     }
 
-//    //当前有主校曲线
-//    if(m_RightCurve.m_iTableType==3 && m_RightCurve.m_strFormInfoType=="curveObject")
-//    {
-//    }
-//    else
-//    {
-//        QMessageBox::warning(this, "提示", "请先选择校正曲线!");
-//        return;
-//    }
-
     //通知界面,清除全部分段线
     emit CallManage::getInstance()->sig_DelAllShiftLineFromPlot(m_strUuid, m_LeftCurve.m_strSlfName, m_LeftCurve.m_strWellName, m_LeftCurve.m_strTrackName, m_LeftCurve.m_strLineName);
+
+    //当前有主校曲线
+    if(m_RightCurve.m_iTableType==3 && m_RightCurve.m_strFormInfoType=="curveObject")
+    {
+        //通知界面,清除全部分段线
+        emit CallManage::getInstance()->sig_DelAllShiftLineFromPlot_Master(m_strUuid, m_RightCurve.m_strSlfName, m_RightCurve.m_strWellName, m_RightCurve.m_strTrackName, m_RightCurve.m_strLineName);
+    }
+    else
+    {
+//        QMessageBox::warning(this, "提示", "请先选择校正曲线!");
+//        return;
+    }
 }
 
 //自动对比
@@ -2111,6 +2288,11 @@ void MainWindowCurve::s_ClearAllSetCurve()
     //当前有主校曲线
     if(m_RightCurve.m_iTableType==3 && m_RightCurve.m_strFormInfoType=="curveObject")
     {
+        //-----------------------
+        //通知界面,清除全部分段线
+        emit CallManage::getInstance()->sig_DelAllShiftLineFromPlot_Master(m_strUuid, m_RightCurve.m_strSlfName, m_RightCurve.m_strWellName, m_RightCurve.m_strTrackName, m_RightCurve.m_strLineName);
+        //-----------------------
+
         //修改当前曲线选择状态 iSelect=0未知
         emit CallManage::getInstance()->sig_ChangeLineStatus(m_strUuid, m_RightCurve.m_strSlfName, m_RightCurve.m_strWellName, m_RightCurve.m_strTrackName, m_RightCurve.m_strLineName, 0, m_bMerge);
 
@@ -2621,6 +2803,16 @@ void MainWindowCurve::_slotExport(QPrinter &printer, int IsBmp, QString pngName,
 //        changeDepthForPrint();
 //    }
 
+    //--/////////////////////////////////
+    //重置行高
+    int iTableSize_Head_Tmp = 0;
+    getTableSize_Head(iTableSize_Head_Tmp);
+    if(iTableSize_Head_Tmp > (100+m_nObjLayerH))
+    {
+        //打印出图，改变深度
+        changeDepthForPrint();
+    }
+    //--/////////////////////////////////
 
     printer.setPageMargins(0.0,0.0,0.0,0.0,QPrinter::DevicePixel);
     printer.setFullPage(true);
@@ -2650,7 +2842,6 @@ void MainWindowCurve::_slotExport(QPrinter &printer, int IsBmp, QString pngName,
     //高度
     for(int i=0; i<ui->tableWidget_2->rowCount(); i++)
     {
-
         iHight += ui->tableWidget_2->rowHeight(i);
     }
     iHight += 9 + (ui->tableWidget_2->rowCount()+1);//上margin + 边框n+1
@@ -3718,16 +3909,12 @@ void MainWindowCurve::s_NewGanZhuangTu()
         return;
     }
 
-	int nW = 4;
-	QStringList sret = this->insertCol(nW);
-	if (sret.length() <= 0)
-		return;
-    QString strWellName = sret.at(0);
-    //直接从选中的井获取，data记录slf路径
-    QString strSlfName = sret.at(1);
+    QStringList sret = this->getSelectWell_New();
+    if(sret.length() <= 0)
+        return;
 
-    //新建道
-    emit CallManage::getInstance()->sig_NewTrack(m_strUuid, strWellName, strSlfName, "GANZHUANG.LINE", "ganzhuangtuObject", nW);
+    //新建井+道+曲线(首条)
+    NewWellAndTrack(sret.at(0), sret.at(1), "GANZHUANG.LINE", "ganzhuangtuObject");
 }
 
 void MainWindowCurve::s_roseAc()
@@ -3776,16 +3963,12 @@ void MainWindowCurve::s_Jykt()
         return;
     }
 
-    int nW = 4;
-    QStringList sret = this->insertCol(nW);
-    if (sret.length() <= 0)
+    QStringList sret = this->getSelectWell_New();
+    if(sret.length() <= 0)
         return;
-    QString strWellName = sret.at(0);
-    //直接从选中的井获取，data记录slf路径
-    QString strSlfName = sret.at(1);
 
-    //新建道
-    emit CallManage::getInstance()->sig_NewTrack(m_strUuid, strWellName, strSlfName, "JINGYANKUATA.LINE", "JyktObject", nW);
+    //新建井+道+曲线(首条)
+    NewWellAndTrack(sret.at(0), sret.at(1), "JINGYANKUATA.LINE", "JyktObject");
 }
 
 //井斜方位图
@@ -3797,17 +3980,12 @@ void MainWindowCurve::s_Denv()
         emit CallManage::getInstance()->sig_AddDenv(m_strUuid, m_SelectTableItem.m_strSlfName, m_SelectTableItem.m_strWellName, m_SelectTableItem.m_strTrackName, "XIEFANGWEI.LINE");
         return;
     }
-
-    int nW = 4;
-    QStringList sret = this->insertCol(nW);
-    if (sret.length() <= 0)
+    QStringList sret = this->getSelectWell_New();
+    if(sret.length() <= 0)
         return;
-    QString strWellName = sret.at(0);
-    //直接从选中的井获取，data记录slf路径
-    QString strSlfName = sret.at(1);
 
-    //新建道
-    emit CallManage::getInstance()->sig_NewTrack(m_strUuid, strWellName, strSlfName, "XIEFANGWEI.LINE", "DenvObject", nW);
+    //新建井+道+曲线(首条)
+    NewWellAndTrack(sret.at(0), sret.at(1), "XIEFANGWEI.LINE", "DenvObject");
 }
 
 //图像 成图
@@ -3889,19 +4067,12 @@ void MainWindowCurve::s_NewMCals()
         return;
     }
 
-    int nW = 4;
-    QStringList sret = this->insertCol(nW);
-    if (sret.length() <= 0)
+    QStringList sret = this->getSelectWell_New();
+    if(sret.length() <= 0)
         return;
-    QString strWellName = sret.at(0);
-    //直接从选中的井获取，data记录slf路径
-    QString strSlfName = sret.at(1);
 
-    //新建道
-    emit CallManage::getInstance()->sig_NewTrack(m_strUuid, strWellName, strSlfName, "FCA2", "MCalsObject", nW);
-
-//    //新建井+道+曲线(首条)
-//    NewWellAndTrack(sret.at(0), sret.at(1), "FCA2", "MCalsObject");
+    //新建井+道+曲线(首条)
+    NewWellAndTrack(sret.at(0), sret.at(1), "FCA2", "MCalsObject");
 }
 
 //套管组件
@@ -4544,8 +4715,8 @@ void MainWindowCurve::changeDepthForPrint()
     //
     //获取井well前2行的高度
     int iTableSize_Head = 100 + m_nObjLayerH;
-    //此处还没有生成well，所以不能这样获取
-    //getTableSize_Head(iTableSize_Head);
+    //
+    getTableSize_Head(iTableSize_Head);
     //
     ui->tableWidget_2->setRowHeight(1, (int)iHeightOfScreen+iTableSize_Head+(3+1)+10);
     //update();
@@ -4971,5 +5142,21 @@ void MainWindowCurve::setTableSize_Well()
              }
         }
     }
-
+}
+
+//修改滚动条，针对新建的
+void MainWindowCurve::s_changeScrollBar(QString strUuid)
+{
+    if(m_strUuid==strUuid)
+    {
+    }
+    else
+    {
+        return;
+    }
+
+    int iCurValue = ui->verticalScrollBar->value();
+    vertScrollBarChanged(iCurValue);
+
+    //ui->verticalScrollBar->setValue(iCurValue+1);//-m_iY2
 }
diff --git a/logPlus/mainwindowcurve.h b/logPlus/mainwindowcurve.h
index ffda537..ba76456 100644
--- a/logPlus/mainwindowcurve.h
+++ b/logPlus/mainwindowcurve.h
@@ -162,11 +162,22 @@ public slots:
 
     //右键--添加分段线
     void s_AddShiftLine(QString strUuid, double left_Low, double right_Hight);
+    //校深(主校补充线段)
+    void s_AddShiftLine_Master(QString strUuid, double left_Low, double right_Hight, QString strUuid_biaozhun);
     //右键--清除当前分段线
     void s_DelSelectShiftLine(QString strUuid);
     //右键--清除全部分段线
     void s_DelAllShiftLine(QString strUuid);
 
+    //校准曲线拖动后，通知补充线段移动
+    void s_ChangeRange_Master(QString strUuid, double left_Low, double right_Hight, QString strUuid_biaozhun);
+    //补充曲线拖动后，通知校准线段移动
+    void s_ChangeRange_Jiaozhun(QString strUuid, double left_Low, double right_Hight, QString strUuid_biaozhun);
+    //补充曲线选中后，改变校准线段颜色(重新选中)
+    void s_ChangeSelectShiftLineColor_Jiaozhun(QString strUuid, QString strUuid_biaozhun);
+    //校准曲线选中后，改变补充线段颜色(重新选中)
+    void s_ChangeSelectShiftLineColor_Master(QString strUuid, QString strUuid_biaozhun);
+
     //右键菜单响应函数
     void slotContextMenu(QPoint pos);
     void slotDeleteSelectWell();
@@ -240,6 +251,9 @@ public slots:
     //编辑曲线，框选拉伸/压缩
     void s_EShiftDepth(QString strSlfName, QString strLineName, int count, QList<double> left_Low_List, QList<double> right_Hight_List);
 
+    //修改滚动条，针对新建的
+    void s_changeScrollBar(QString strUuid);
+
     //
     void s_selectWell();        //选择井
     void s_showHeadTable();     //显示/隐藏图头
diff --git a/logPlus/qmycustomplot.cpp b/logPlus/qmycustomplot.cpp
index 10d2ae4..88b4902 100644
--- a/logPlus/qmycustomplot.cpp
+++ b/logPlus/qmycustomplot.cpp
@@ -14,6 +14,7 @@
 #include "TransparentDraggableFac.h"
 #include "transparentdraggableGuan.h"
 #include "TransparentDraggableLine.h"
+#include "TransparentDraggableLine_Master.h"
 #include "transparentdraggableSelectRect.h"
 #include "transparentdraggableLayer.h"
 #include "transparentdraggableRightList.h"
@@ -162,10 +163,23 @@ QMyCustomPlot::QMyCustomPlot(QWidget *parent, QString strSlfName, QString strWel
             this, SLOT(s_ChangeFillMode(QString, QString, QString, QString, QString, QString, QString, QColor, QString, QString, float, float, QString, QColor, QColor, QString, bool)));
     //添加校深线段
     connect(CallManage::getInstance(), SIGNAL(sig_AddShifLineToPlot(QString, QString, QString, QString, QString, double, double)), this, SLOT(s_AddShifLineToPlot(QString, QString, QString, QString, QString, double, double)));
+    //添加校深线段(主校补充线段)
+    connect(CallManage::getInstance(), SIGNAL(sig_AddShifLineToPlot_Master(QString, QString, QString, QString, QString, double, double, QString)), this, SLOT(s_AddShifLineToPlot_Master(QString, QString, QString, QString, QString, double, double, QString)));
+    //校准线段移动
+    connect(CallManage::getInstance(), SIGNAL(sig_MoveLine_Jiaozhun(QString, QString, QString, QString, QString, double, double, QString)), this, SLOT(s_MoveLine_Jiaozhun(QString, QString, QString, QString, QString, double, double, QString)));
+    //校准线段颜色(重新选中)
+    connect(CallManage::getInstance(), SIGNAL(sig_ChangeLineColor_Jiaozhun(QString, QString, QString, QString, QString, QString)), this, SLOT(s_ChangeLineColor_Jiaozhun(QString, QString, QString, QString, QString, QString)));
+    //补充线段颜色(重新选中)
+    connect(CallManage::getInstance(), SIGNAL(sig_ChangeLineColor_Master(QString, QString, QString, QString, QString, QString)), this, SLOT(s_ChangeLineColor_Master(QString, QString, QString, QString, QString, QString)));
+
     //清除当前分段线
-    connect(CallManage::getInstance(), SIGNAL(sig_DelSelectShiftLineFromPlot(QString, QString, QString, QString, QString)), this, SLOT(s_DelSelectShiftLineFromPlot(QString, QString, QString, QString, QString)));
+    connect(CallManage::getInstance(), SIGNAL(sig_DelSelectShiftLineFromPlot(QString, QString, QString, QString, QString, QString, QString)), this, SLOT(s_DelSelectShiftLineFromPlot(QString, QString, QString, QString, QString, QString, QString)));
+    //清除当前分段线
+    connect(CallManage::getInstance(), SIGNAL(sig_DelSelectShiftLineFromPlot_Master(QString, QString, QString, QString, QString, QString)), this, SLOT(s_DelSelectShiftLineFromPlot_Master(QString, QString, QString, QString, QString, QString)));
     //清除全部分段线
     connect(CallManage::getInstance(), SIGNAL(sig_DelAllShiftLineFromPlot(QString, QString, QString, QString, QString)), this, SLOT(s_DelAllShiftLineFromPlot(QString, QString, QString, QString, QString)));
+    //清除全部分段线
+    connect(CallManage::getInstance(), SIGNAL(sig_DelAllShiftLineFromPlot_Master(QString, QString, QString, QString, QString)), this, SLOT(s_DelAllShiftLineFromPlot_Master(QString, QString, QString, QString, QString)));
 
     //执行校正
     connect(CallManage::getInstance(), SIGNAL(sig_RuncorFromPlot(QString, QString, QString, QString, QString)), this, SLOT(s_RuncorFromPlot(QString, QString, QString, QString, QString)));
@@ -251,6 +265,9 @@ void QMyCustomPlot::initGeometry(QString strUuid, int nscale, double fW)
 
 	int ntmpw = fW * g_dPixelPerCm;
 	this->setGeometry(0, 0, ntmpw - 2, (int)dHight);
+
+    //修改滚动条，针对新建的
+    emit CallManage::getInstance()->sig_changeScrollBar(m_strUuid);
 }
 
 void QMyCustomPlot::changePropertyWaveUpdate()
@@ -4868,8 +4885,154 @@ void QMyCustomPlot::s_AddShifLineToPlot(QString strUuid, QString strSlfName, QSt
     addLineToPlot(left_Low, right_Hight, "");
 }
 
+//校深线段(主校补充线段)
+void QMyCustomPlot::s_AddShifLineToPlot_Master(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, double left_Low, double right_Hight, QString strUuid_biaozhun)
+{
+    if(m_strUuid == strUuid &&
+       m_strSlfName == strSlfName &&
+       m_strWellName == strWellName &&
+       m_strTrackName == strTrackName &&
+       m_strLineName == strLineName)
+    {
+
+    }
+    else
+    {
+        return;
+    }
+
+    addLineToPlot_Master(left_Low, right_Hight, "", strUuid_biaozhun);
+}
+
+//校准线段移动
+void QMyCustomPlot::s_MoveLine_Jiaozhun(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, double left_Low, double right_Hight, QString strUuid_biaozhun)
+{
+    if(m_strUuid == strUuid &&
+       m_strSlfName == strSlfName &&
+       m_strWellName == strWellName &&
+       m_strTrackName == strTrackName &&
+       m_strLineName == strLineName)
+    {
+
+    }
+    else
+    {
+        return;
+    }
+
+    //
+    TransparentDraggableLine *pDraggableLine =NULL;
+    QMap<QString,QObject *>::Iterator it = m_mapDraggable_Line.begin();
+    while( it != m_mapDraggable_Line.end() )
+    {
+        pDraggableLine = (TransparentDraggableLine*)it.value();
+        if(pDraggableLine->m_strUuid == strUuid_biaozhun)
+        {
+            //存在老的同id线段，进行移动
+            double lY2 = this->yAxis->range().upper;
+            pDraggableLine->qcpItemLine->end->setCoords(left_Low, lY2);//圆心位置
+            replot();
+            return;
+        }
+        it++;
+    }
+}
+
+//校准线段颜色(重新选中)
+void QMyCustomPlot::s_ChangeLineColor_Jiaozhun(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, QString strUuid_biaozhun)
+{
+    if(m_strUuid == strUuid &&
+       m_strSlfName == strSlfName &&
+       m_strWellName == strWellName &&
+       m_strTrackName == strTrackName &&
+       m_strLineName == strLineName)
+    {
+
+    }
+    else
+    {
+        return;
+    }
+
+    //
+    TransparentDraggableLine *pDraggableLine =NULL;
+    QMap<QString,QObject *>::Iterator it = m_mapDraggable_Line.begin();
+    while( it != m_mapDraggable_Line.end() )
+    {
+        pDraggableLine = (TransparentDraggableLine*)it.value();
+        if(pDraggableLine->m_strUuid == strUuid_biaozhun)
+        {
+            //存在老的同id线段
+            if(this->m_SelectShiftLine)
+            {
+                //之前的选中线段，恢复黑色
+                TransparentDraggableLine *tmpLine = (TransparentDraggableLine*)this->m_SelectShiftLine;
+                if(tmpLine)
+                {
+                    tmpLine->qcpItemLine->setPen(QPen(Qt::blue, 2));
+                }
+            }
+
+            //重新设置选中线段
+            m_SelectShiftLine = pDraggableLine;
+            pDraggableLine->qcpItemLine->setPen(QPen(Qt::red, 2));
+
+            replot();
+            return;
+        }
+        it++;
+    }
+}
+
+//补充线段颜色(重新选中)
+void QMyCustomPlot::s_ChangeLineColor_Master(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, QString strUuid_biaozhun)
+{
+    if(m_strUuid == strUuid &&
+       m_strSlfName == strSlfName &&
+       m_strWellName == strWellName &&
+       m_strTrackName == strTrackName &&
+       m_strLineName == strLineName)
+    {
+
+    }
+    else
+    {
+        return;
+    }
+
+    //
+    TransparentDraggableLine_Master *pDraggableLine =NULL;
+    QMap<QString,QObject *>::Iterator it = m_mapDraggable_Line_Master.begin();
+    while( it != m_mapDraggable_Line_Master.end() )
+    {
+        pDraggableLine = (TransparentDraggableLine_Master*)it.value();
+        if(pDraggableLine->m_strUuid == strUuid_biaozhun)
+        {
+            //存在老的同id线段
+            if(this->m_SelectShiftLine)
+            {
+                //之前的选中线段，恢复黑色
+                TransparentDraggableLine_Master *tmpLine = (TransparentDraggableLine_Master*)this->m_SelectShiftLine;
+                if(tmpLine)
+                {
+                    tmpLine->qcpItemLine->setPen(QPen(Qt::blue, 2));
+                }
+            }
+
+            //重新设置选中线段
+            m_SelectShiftLine = pDraggableLine;
+            pDraggableLine->qcpItemLine->setPen(QPen(Qt::red, 2));
+
+            replot();
+            return;
+        }
+        it++;
+    }
+}
+
 //清除当前分段线
-void QMyCustomPlot::s_DelSelectShiftLineFromPlot(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName)
+void QMyCustomPlot::s_DelSelectShiftLineFromPlot(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName,
+                                                 QString strTrackName_Right, QString strLineName_Right)
 {
     if(m_strUuid == strUuid &&
        m_strSlfName == strSlfName &&
@@ -4885,14 +5048,58 @@ void QMyCustomPlot::s_DelSelectShiftLineFromPlot(QString strUuid, QString strSlf
     }
 
     if(m_SelectShiftLine)
-    {
+    {                
         TransparentDraggableLine *pDraggableLine = (TransparentDraggableLine *)m_SelectShiftLine;
+
+        //先清除补充线段
+        emit CallManage::getInstance()->sig_DelSelectShiftLineFromPlot_Master(m_strUuid,
+                                                                      m_strSlfName, m_strWellName, strTrackName_Right, strLineName_Right, pDraggableLine->m_strUuid);
+
+        //再清除当前选中线段
         pDraggableLine->deleteRect();
         m_SelectShiftLine = nullptr;
     }
     replot();
 }
 
+//清除当前分段线
+void QMyCustomPlot::s_DelSelectShiftLineFromPlot_Master(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, QString strUuid_biaozhun)
+{
+    if(m_strUuid == strUuid &&
+       m_strSlfName == strSlfName &&
+       m_strWellName == strWellName &&
+       m_strTrackName == strTrackName &&
+       m_strLineName == strLineName)
+    {
+
+    }
+    else
+    {
+        return;
+    }
+
+//    if(m_SelectShiftLine)
+//    {
+//        TransparentDraggableLine *pDraggableLine = (TransparentDraggableLine *)m_SelectShiftLine;
+//        pDraggableLine->deleteRect();
+//        m_SelectShiftLine = nullptr;
+//    }
+    TransparentDraggableLine_Master *pDraggableLine =NULL;
+    QMap<QString,QObject *>::Iterator it = m_mapDraggable_Line_Master.begin();
+    while( it != m_mapDraggable_Line_Master.end() )
+    {
+        pDraggableLine = (TransparentDraggableLine_Master*)it.value();
+        if(pDraggableLine->m_strUuid == strUuid_biaozhun)
+        {
+            pDraggableLine->deleteRect();
+            m_SelectShiftLine = nullptr;
+            break;
+        }
+        it++;
+    }
+    replot();
+}
+
 //清除全部分段线
 void QMyCustomPlot::s_DelAllShiftLineFromPlot(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName)
 {
@@ -4916,8 +5123,36 @@ void QMyCustomPlot::s_DelAllShiftLineFromPlot(QString strUuid, QString strSlfNam
         pDraggableLine = (TransparentDraggableLine*)it.value();
         it++;
         pDraggableLine->deleteRect();
-        m_SelectShiftLine = nullptr;
     }
+    m_SelectShiftLine = nullptr;
+    this->replot();
+}
+
+//清除全部分段线
+void QMyCustomPlot::s_DelAllShiftLineFromPlot_Master(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName)
+{
+    if(m_strUuid == strUuid &&
+       m_strSlfName == strSlfName &&
+       m_strWellName == strWellName &&
+       m_strTrackName == strTrackName &&
+       m_strLineName == strLineName)
+    {
+
+    }
+    else
+    {
+        return;
+    }
+
+    TransparentDraggableLine_Master *pDraggableLine =NULL;
+    QMap<QString,QObject *>::Iterator it = m_mapDraggable_Line_Master.begin();
+    while( it != m_mapDraggable_Line_Master.end() )
+    {
+        pDraggableLine = (TransparentDraggableLine_Master*)it.value();
+        it++;
+        pDraggableLine->deleteRect();
+    }
+    m_SelectShiftLine = nullptr;
     this->replot();
 }
 
@@ -5715,6 +5950,39 @@ void QMyCustomPlot::addLineToPlot(double left_Low, double right_Hight, const QSt
     dragRect->setTitle(strText);
     m_mapDraggable_Line[strUuid] = dragRect;
 
+    //通知界面,增加一条主校补充线段
+    emit CallManage::getInstance()->sig_AddShiftLine_Master(m_strUuid, left_Low, right_Hight, strUuid);
+}
+
+//校深线段(主校补充线段)
+void QMyCustomPlot::addLineToPlot_Master(double left_Low, double right_Hight, const QString strText, QString strUuid_biaozhun, QColor crColor)
+{
+    QString strUuid = strUuid_biaozhun;
+
+    TransparentDraggableLine_Master *pDraggableLine =NULL;
+    QMap<QString,QObject *>::Iterator it = m_mapDraggable_Line_Master.begin();
+    while( it != m_mapDraggable_Line_Master.end() )
+    {
+        pDraggableLine = (TransparentDraggableLine_Master*)it.value();
+        if(pDraggableLine->m_strUuid == strUuid_biaozhun)
+        {
+            //存在老的同id线段，进行移动
+            pDraggableLine->setRange(left_Low, right_Hight);
+            return;
+        }
+        it++;
+    }
+
+    // 在初始化代码中
+    TransparentDraggableLine_Master *dragRect = new TransparentDraggableLine_Master(this, strUuid);
+    // 设置初始范围
+    dragRect->setRange(left_Low, right_Hight);
+    // 可选：设置颜色
+    dragRect->setColor(crColor); // 半透明白色
+    //最小宽度
+    dragRect->setMinWidth(0.1);
+    dragRect->setTitle(strText);
+    m_mapDraggable_Line_Master[strUuid] = dragRect;
 }
 
 void QMyCustomPlot::addTextToPlot(double left_Low, double right_Hight, const QString strText, bool bRefresh, QColor crColor)
diff --git a/logPlus/qmycustomplot.h b/logPlus/qmycustomplot.h
index f4dacde..64f5fb4 100644
--- a/logPlus/qmycustomplot.h
+++ b/logPlus/qmycustomplot.h
@@ -282,6 +282,7 @@ public:
     QMap<QString, QObject*> m_mapDraggable_Guan;
     QMap<QString, QObject*> m_mapDraggable_Jiegutext;
     QMap<QString, QObject*> m_mapDraggable_Line;
+    QMap<QString, QObject*> m_mapDraggable_Line_Master;
     QMap<QString, QObject*> m_mapDraggable_SelectRect;
     QMap<QString, QObject*> m_mapDraggable_RightList;
     QMap<QString, QObject*> m_mapDraggable_CorePhysics; // 岩心分析
@@ -457,6 +458,9 @@ public:
 
     //校深线段
     void addLineToPlot(double left_Low, double right_Hight, const QString strText, QColor crColor=QColor(255, 255, 255, 80));
+    //校深线段(主校补充线段)
+    void addLineToPlot_Master(double left_Low, double right_Hight, const QString strText, QString strUuid_biaozhun, QColor crColor=QColor(255, 255, 255, 80));
+
 
     //框选并编辑曲线
     void addSelectRectToPlot(double left_Low, double right_Hight, int left_Low_Number, int right_Hight_Number);
@@ -516,16 +520,28 @@ public slots:
     void onAddShiftLine();
     //校深线段
     void s_AddShifLineToPlot(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, double left_Low, double right_Hight);
+    //校深线段(主校补充线段)
+    void s_AddShifLineToPlot_Master(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, double left_Low, double right_Hight, QString strUuid_biaozhun);
+    //校准线段移动
+    void s_MoveLine_Jiaozhun(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, double left_Low, double right_Hight, QString strUuid_biaozhun);
+    //校准线段颜色(重新选中)
+    void s_ChangeLineColor_Jiaozhun(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, QString strUuid_biaozhun);
+    //补充线段颜色(重新选中)
+    void s_ChangeLineColor_Master(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, QString strUuid_biaozhun);
 
     //右键--清除当前分段线
     void onDelSelectShiftLine();
     //清除当前分段线
-    void s_DelSelectShiftLineFromPlot(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName);
+    void s_DelSelectShiftLineFromPlot(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, QString strTrackName_Right, QString strLineName_Right);
+    //清除当前分段线
+    void s_DelSelectShiftLineFromPlot_Master(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, QString strUuid_biaozhun);
 
     //右键--清除全部分段线
     void onDelAllShiftLine();
     //清除全部分段线
     void s_DelAllShiftLineFromPlot(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName);
+    //清除全部分段线
+    void s_DelAllShiftLineFromPlot_Master(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName);
 
     //右键--编辑曲线
     void onEditLine();