diff --git a/CallManage/CallManage.h b/CallManage/CallManage.h
index 0a4bd07..23d4e2e 100644
--- a/CallManage/CallManage.h
+++ b/CallManage/CallManage.h
@@ -275,6 +275,9 @@ signals:
     //改变井斜方位图属性
     void sig_changeDenvProperty(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName);
 
+    //改变多臂井径属性
+    void sig_changeMCalsProperty(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, QString strNewLineName);
+
     //
     //void sig_addImageToPlot(QMyCustomPlot* customPlot, double left_Low, double right_Hight, QString imagePath);
 
diff --git a/logPlus/DrawNrad.cpp b/logPlus/DrawNrad.cpp
index e0548cc..fa2669b 100644
--- a/logPlus/DrawNrad.cpp
+++ b/logPlus/DrawNrad.cpp
@@ -122,6 +122,12 @@ void CDrawNrad::DrawNrad(QString strSlfName, QString csCurve)
 
     // 初始化
     int iMyWidth = m_myCustomPlot->axisRect(0)->width();
+
+    //重置范围
+    float vmax = iMyWidth;
+    float vmin = 0;
+    m_myCustomPlot->yAxis->setRange(vmin, vmax);
+
     centerX = (iMyWidth+0)/2.0;
     centerY = 0;
     nWidth = iMyWidth;
diff --git a/logPlus/PropertyWidget.cpp b/logPlus/PropertyWidget.cpp
index 1f9343f..52ab853 100644
--- a/logPlus/PropertyWidget.cpp
+++ b/logPlus/PropertyWidget.cpp
@@ -2392,6 +2392,13 @@ void PropertyWidget::SlotPropertyChanged( QtProperty *pProperty, const QVariant
         //
         changedDenvProperty(m_propertyData[pProperty], variant);
     }
+    else if (m_strCurrentProperty == MCals_Property)//多臂井径
+    {
+        //先处理通用属性
+        CommonPropertyChanged(pProperty, variant);
+        //
+        changedMCalsProperty(m_propertyData[pProperty], variant);
+    }
 }
 
 void PropertyWidget::SlotPropertyChanged(QtProperty *property, const int &val, bool islinestyle)
@@ -3236,6 +3243,11 @@ void PropertyWidget::initProperty(FormInfo *formInfo)
     {
         //井斜方位图
         this->initDenvProperty(formInfo);
+    }
+    else if (formInfo->m_strType == "MCalsObject")
+    {
+        //多臂井径
+        this->initMCalsProperty(formInfo);
     }
 	else if (formInfo->m_strType == "depthObject")
 	{
@@ -5236,7 +5248,7 @@ void PropertyWidget::changedRoseProperty(QString strProperty, QVariant varVal)
         emit CallManage::getInstance()->sig_changeRoseProperty(variantMap);
     }
 }
-
+//蝌蚪图
 void PropertyWidget::initKedouProperty(FormInfo *formInfo)
 {
     _CreateVariantPropertyItem("曲线图名", "显示名称", formInfo->m_strAliasName, QVariant::String);
@@ -5278,7 +5290,7 @@ void PropertyWidget::initKedouProperty(FormInfo *formInfo)
 
     m_strCurrentProperty = Kedou_Property;
 }
-
+//蝌蚪图
 void PropertyWidget::changedKedouProperty(QString strProperty, QVariant varVal)
 {
     bool flag = false;
@@ -5483,7 +5495,7 @@ void PropertyWidget::changedKedouProperty(QString strProperty, QVariant varVal)
         emit CallManage::getInstance()->sig_changeKedouProperty(m_formInfo->m_strUuid, m_formInfo->m_strSlfName, m_formInfo->m_strWellName, m_formInfo->m_strTrackName, m_formInfo->m_strLineName);
     }
 }
-
+//杆状图
 void PropertyWidget::initGanzhuangProperty(FormInfo *formInfo)
 {
     _CreateVariantPropertyItem("曲线图名", "显示名称", formInfo->m_strAliasName, QVariant::String);
@@ -5509,7 +5521,7 @@ void PropertyWidget::initGanzhuangProperty(FormInfo *formInfo)
 
     m_strCurrentProperty = Ganzhuang_Property;
 }
-
+//杆状图
 void PropertyWidget::changedGanzhuangProperty(QString strProperty, QVariant varVal)
 {
     bool flag = false;
@@ -5584,7 +5596,7 @@ void PropertyWidget::changedGanzhuangProperty(QString strProperty, QVariant varV
         emit CallManage::getInstance()->sig_changeGanzhuangProperty(m_formInfo->m_strUuid, m_formInfo->m_strSlfName, m_formInfo->m_strWellName, m_formInfo->m_strTrackName, m_formInfo->m_strLineName);
     }
 }
-
+//井眼垮塌矢量图
 void PropertyWidget::initJyktProperty(FormInfo *formInfo)
 {
     _CreateVariantPropertyItem("曲线图名", "显示名称", formInfo->m_strAliasName, QVariant::String);
@@ -5609,7 +5621,7 @@ void PropertyWidget::initJyktProperty(FormInfo *formInfo)
 
     m_strCurrentProperty = Jykt_Property;
 }
-
+//井眼垮塌矢量图
 void PropertyWidget::changedJyktProperty(QString strProperty, QVariant varVal)
 {
     bool flag = false;
@@ -5695,7 +5707,7 @@ void PropertyWidget::changedJyktProperty(QString strProperty, QVariant varVal)
     }
 }
 
-
+//井斜方位图
 void PropertyWidget::initDenvProperty(FormInfo *formInfo)
 {
     _CreateVariantPropertyItem("曲线图名", "显示名称", formInfo->m_strAliasName, QVariant::String);
@@ -5720,7 +5732,7 @@ void PropertyWidget::initDenvProperty(FormInfo *formInfo)
 
     m_strCurrentProperty = Denv_Property;
 }
-
+//井斜方位图
 void PropertyWidget::changedDenvProperty(QString strProperty, QVariant varVal)
 {
     bool flag = false;
@@ -5800,3 +5812,148 @@ void PropertyWidget::changedDenvProperty(QString strProperty, QVariant varVal)
         emit CallManage::getInstance()->sig_changeDenvProperty(m_formInfo->m_strUuid, m_formInfo->m_strSlfName, m_formInfo->m_strWellName, m_formInfo->m_strTrackName, m_formInfo->m_strLineName);
     }
 }
+
+//多臂井径
+void PropertyWidget::initMCalsProperty(FormInfo *formInfo)
+{
+    _CreateVariantPropertyItem("曲线图名", "显示名称", formInfo->m_strAliasName, QVariant::String);
+    _CreateVariantPropertyItem("通常", "选择井曲线", m_strLineName + "@" + m_strSlfName, QVariant::String);
+
+    //
+    _CreateVariantPropertyItem("网格图", "最小井径", formInfo->m_MinVal, QVariant::Double);
+    _CreateVariantPropertyItem("网格图", "最大井径", formInfo->m_MaxVal, QVariant::Double);
+    _CreateVariantPropertyItem("网格图", "左边井径序号", formInfo->m_iStartArmPos, QVariant::Int);
+    _CreateVariantPropertyItem("网格图", "右边井径序号", formInfo->m_iEndArmPos, QVariant::Int);
+    _CreateVariantPropertyItem("网格图", "最小外径占道比例", formInfo->m_MinRatio, QVariant::Double);
+    _CreateVariantPropertyItem("网格图", "最大外径占道比例", formInfo->m_MaxRatio, QVariant::Double);
+    _CreateVariantPropertyItem("网格图", "纵向网格间隔", formInfo->m_nVertGrid, QVariant::Int);
+    _CreateVariantPropertyItem("网格图", "井径曲线间网格", formInfo->m_nHorzGrid, QVariant::Int);
+    _CreateVariantPropertyItem("网格图", "旋转井径增量", formInfo->m_nHorzStep, QVariant::Int);
+    _CreateVariantPropertyItem("网格图", "井柱椭圆纵横半径比", formInfo->m_flVFactor, QVariant::Double);
+    _CreateVariantPropertyItem("网格图", "横格线宽度", formInfo->m_nHLineWidth, QVariant::Int);
+    _CreateVariantPropertyItem("网格图", "横格线颜色", formInfo->m_HLineColor, QVariant::Color);
+    _CreateVariantPropertyItem("网格图", "纵格线宽度", formInfo->m_nVLineWidth, QVariant::Int);
+    _CreateVariantPropertyItem("网格图", "纵格线颜色", formInfo->m_VLineColor, QVariant::Color);
+    m_strCurrentProperty = MCals_Property;
+}
+//多臂井径
+void PropertyWidget::changedMCalsProperty(QString strProperty, QVariant varVal)
+{
+    bool flag = false;
+
+    if("选择井曲线" == strProperty)
+    {
+        QString sFilePath = varVal.toString();
+        if(sFilePath.indexOf("@")>-1)
+        {
+            int ind=sFilePath.indexOf("@");
+            QString strLineName = sFilePath.left(ind);
+            sFilePath=sFilePath.mid(ind+1);
+            sFilePath.trimmed();
+            {
+                QString strOldLineName = m_formInfo->m_strLineName;
+                QString strOldSlfName = m_formInfo->m_strSlfName;
+                //暂时不允许改变slf井次名称，不然不在同一口井绘制
+                if(strOldSlfName != sFilePath)
+                {
+                    QMessageBox::information(nullptr,"提示","不允许改变slf井次名称");
+                    return;
+                }
+                //名称不变
+                if(strOldLineName == strLineName)
+                {
+                    return;
+                }
+                if("" == strLineName)
+                {
+                    return;
+                }
+
+                //
+                m_formInfo->m_strLineName = strLineName;
+                //m_formInfo->m_strSlfName = sFilePath;
+                m_formInfo->update();
+                //flag = true;
+                //此处需要使用strOldLineName
+                emit CallManage::getInstance()->sig_changeMCalsProperty(m_formInfo->m_strUuid, m_formInfo->m_strSlfName, m_formInfo->m_strWellName, m_formInfo->m_strTrackName, strOldLineName, strLineName);
+                return;
+            }
+        }
+    }
+    // 网格图
+    else if ("最小井径" == strProperty)
+    {
+        this->m_formInfo->m_MinVal = varVal.toDouble();
+        flag = true;
+    }
+    else if ("最大井径" == strProperty)
+    {
+        this->m_formInfo->m_MaxVal = varVal.toDouble();
+        flag = true;
+    }
+    else if ("左边井径序号" == strProperty)
+    {
+        this->m_formInfo->m_iStartArmPos = varVal.toInt();
+        flag = true;
+    }
+    else if ("右边井径序号" == strProperty)
+    {
+        this->m_formInfo->m_iEndArmPos = varVal.toInt();
+        flag = true;
+    }
+    else if ("最小外径占道比例" == strProperty)
+    {
+        this->m_formInfo->m_MinRatio = varVal.toDouble();
+        flag = true;
+    }
+    else if ("最大外径占道比例" == strProperty)
+    {
+        this->m_formInfo->m_MaxRatio = varVal.toDouble();
+        flag = true;
+    }
+    else if ("纵向网格间隔" == strProperty)
+    {
+        this->m_formInfo->m_nVertGrid = varVal.toInt();
+        flag = true;
+    }
+    else if ("井径曲线间网格" == strProperty)
+    {
+        this->m_formInfo->m_nHorzGrid = varVal.toInt();
+        flag = true;
+    }
+    else if ("旋转井径增量" == strProperty)
+    {
+        this->m_formInfo->m_nHorzStep = varVal.toInt();
+        flag = true;
+    }
+    else if ("井柱椭圆纵横半径比" == strProperty)
+    {
+        this->m_formInfo->m_flVFactor = varVal.toDouble();
+        flag = true;
+    }
+    else if ("横格线宽度" == strProperty)
+    {
+        this->m_formInfo->m_nHLineWidth = varVal.toInt();
+        flag = true;
+    }
+    else if ("横格线颜色" == strProperty)
+    {
+        this->m_formInfo->m_HLineColor = varVal.value<QColor>();
+        flag = true;
+    }
+    else if ("纵格线宽度" == strProperty)
+    {
+        this->m_formInfo->m_nVLineWidth = varVal.toInt();
+        flag = true;
+    }
+    else if ("纵格线颜色" == strProperty)
+    {
+        this->m_formInfo->m_VLineColor = varVal.value<QColor>();
+        flag = true;
+    }
+
+    if(flag)
+    {
+        emit CallManage::getInstance()->sig_changeMCalsProperty(m_formInfo->m_strUuid, m_formInfo->m_strSlfName, m_formInfo->m_strWellName, m_formInfo->m_strTrackName, m_formInfo->m_strLineName, m_formInfo->m_strLineName);
+    }
+}
diff --git a/logPlus/PropertyWidget.h b/logPlus/PropertyWidget.h
index 85daec9..29951f4 100644
--- a/logPlus/PropertyWidget.h
+++ b/logPlus/PropertyWidget.h
@@ -82,6 +82,8 @@
 #define Jykt_Property           "Jykt_Property"             //井眼垮塌矢量图
 #define Denv_Property           "Denv_Property"             //井斜方位图
 
+#define MCals_Property          "MCals_Property"            //多臂井径
+
 #pragma execution_character_set("utf-8")
 
 /**
@@ -277,6 +279,10 @@ public:
     void initDenvProperty(FormInfo *formInfo);
     void changedDenvProperty(QString strProName, QVariant val);
 
+    //多臂井径
+    void initMCalsProperty(FormInfo *formInfo);
+    void changedMCalsProperty(QString strProName, QVariant val);
+
 public slots:
     void SlotPropertyChanged(QtProperty *property, const QVariant &variant);
 	void SlotPropertyChanged(QtProperty *property, const int &val, bool islinestyle);
diff --git a/logPlus/formdraw.cpp b/logPlus/formdraw.cpp
index fc8808d..1498e29 100644
--- a/logPlus/formdraw.cpp
+++ b/logPlus/formdraw.cpp
@@ -3415,7 +3415,7 @@ void FormDraw::s_mouseWheel(QWheelEvent *event)
 void FormDraw::setColWidth(float fNewWidth)
 {
 	m_nTrackW = fNewWidth;
-	fNewWidth = fNewWidth * g_dPixelPerCm;
+    //fNewWidth = fNewWidth * g_dPixelPerCm;
     // 获取当前widget的所有子控件
     const QObjectList &children = this->children();
     //判断为空
@@ -4438,7 +4438,7 @@ void FormDraw::initMCals(QMyCustomPlot *widget, QString strSlfName, QString strL
     FormInfo* pInfo = m_formTrack->AddMCals(strSlfName, m_strWellName, m_strTrackName, strLineName, strAliasName, strUnit, newlineColor, width, m_RightVal, m_LeftVal, strScaleType, "MCalsObject", listOtherProperty);
 
     //多臂井径
-    widget->Draw_MCals();
+    widget->Draw_MCals(strLineName, strLineName);
 }
 
 //套管组件
diff --git a/logPlus/forminfo.h b/logPlus/forminfo.h
index d1bc948..1c13555 100644
--- a/logPlus/forminfo.h
+++ b/logPlus/forminfo.h
@@ -404,10 +404,10 @@ public:
     int m_nHorzGrid = 0;    //井径曲线间网格
     int m_nHorzStep = 5;    //旋转井径增量
     float m_flVFactor = 0.8; //井柱椭圆纵横半径比
-    int m_nHLineWidth =1;
-    QColor m_HLineColor = QColor(0,0,0);
-    int m_nVLineWidth =1;
-    QColor m_VLineColor = QColor(0,0,0);
+    int m_nHLineWidth =1;   //横格线宽度
+    QColor m_HLineColor = QColor(0,0,0);//横格线颜色
+    int m_nVLineWidth =1;   //纵格线宽度
+    QColor m_VLineColor = QColor(0,0,0);//纵格线颜色
 
 public:
     void setLineWidth(double dWidth);
diff --git a/logPlus/qmycustomplot.cpp b/logPlus/qmycustomplot.cpp
index 695b1ce..5498ccd 100644
--- a/logPlus/qmycustomplot.cpp
+++ b/logPlus/qmycustomplot.cpp
@@ -222,6 +222,8 @@ QMyCustomPlot::QMyCustomPlot(QWidget *parent, QString strSlfName, QString strWel
     connect(CallManage::getInstance(), SIGNAL(sig_changeJyktProperty(QString, QString, QString, QString, QString)), this, SLOT(s_changeJyktProperty(QString, QString, QString, QString, QString)));
     //改变井斜方位图属性
     connect(CallManage::getInstance(), SIGNAL(sig_changeDenvProperty(QString, QString, QString, QString, QString)), this, SLOT(s_changeDenvProperty(QString, QString, QString, QString, QString)));
+    //改变多臂井径属性
+    connect(CallManage::getInstance(), SIGNAL(sig_changeMCalsProperty(QString, QString, QString, QString, QString, QString)), this, SLOT(s_changeMCalsProperty(QString, QString, QString, QString, QString, QString)));
 }
 
 void QMyCustomPlot::initGeometry(QString strUuid, int nscale, double fW)
@@ -10720,6 +10722,19 @@ void QMyCustomPlot::resetPosition()
     //地质层位
     resetPosition_Layer();
 
+    //
+    FormInfo* pInfo = m_formTrack->getFormInfoByParameters(m_strUuid, m_strWellName, m_strTrackName, m_strLineName);
+    if (pInfo == NULL)
+    {
+        return;
+    }
+
+    if(pInfo->m_strType == "MCalsObject")
+    {
+        //多臂井径
+        Draw_MCals(m_strLineName, m_strLineName);
+        return;
+    }
     //刷新
     replot();
 }
@@ -12797,21 +12812,40 @@ void QMyCustomPlot::Draw_Denv()
     this->replot();
 }
 
-//多臂井径
-void QMyCustomPlot::Draw_MCals()
+//改变多臂井径属性
+void QMyCustomPlot::s_changeMCalsProperty(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, QString strNewLineName)
 {
-    //this->clearGraphs();
+    if(m_strUuid == strUuid &&
+       m_strSlfName == strSlfName &&
+       m_strWellName == strWellName &&
+       m_strTrackName == strTrackName &&
+       m_strLineName == strLineName)
+    {
+
+    }
+    else
+    {
+        return;
+    }
+    //绘制多臂井径
+    Draw_MCals(strLineName, strNewLineName);
+}
+
+//多臂井径
+void QMyCustomPlot::Draw_MCals(QString strLineName, QString strNewLineName)
+{
+    this->clearGraphs();
     this->clearItems();
 
     //
-    FormInfo* pInfo = m_formTrack->getFormInfoByParameters(m_strUuid, m_strWellName, m_strTrackName, m_strLineName);
+    FormInfo* pInfo = m_formTrack->getFormInfoByParameters(m_strUuid, m_strWellName, m_strTrackName, strNewLineName);
     if (pInfo == NULL)
     {
         return;
     }
 
     //多臂井径
-    QString strWaveName = "FCA2";
+    m_strLineName = pInfo->m_strLineName; //"FCA2";
     CDrawNrad *drawNrad = new CDrawNrad(this);
     //属性
     drawNrad->m_LeftVal = pInfo->m_MinVal;//最小井径
@@ -12829,7 +12863,7 @@ void QMyCustomPlot::Draw_MCals()
     drawNrad->m_nVertLineWidth = pInfo->m_nVLineWidth;
     drawNrad->m_crVertLine = pInfo->m_VLineColor;
 
-    drawNrad->ReadData(m_strSlfName, strWaveName);
-    drawNrad->DrawNrad(m_strSlfName, strWaveName);
+    drawNrad->ReadData(m_strSlfName, m_strLineName);
+    drawNrad->DrawNrad(m_strSlfName, m_strLineName);
     this->replot();
 }
diff --git a/logPlus/qmycustomplot.h b/logPlus/qmycustomplot.h
index 3b187ac..ce40e2a 100644
--- a/logPlus/qmycustomplot.h
+++ b/logPlus/qmycustomplot.h
@@ -688,6 +688,10 @@ public slots:
     //改变井斜方位图属性
     void s_changeDenvProperty(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName);
 
+    //改变多臂井径属性
+    void s_changeMCalsProperty(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, QString strNewLineName);
+
+
 public:
     //蝌蚪图重绘网格线
     bool mKedou = false;
@@ -778,7 +782,7 @@ public:
     CPickFrac *m_cPickFrac;
 
     //多臂井径
-    void Draw_MCals();
+    void Draw_MCals(QString strLineName, QString strNewLineName);
 
 private: