logplus/logPlus/TransparentDraggableGujing.cpp

#include "TransparentDraggableGujing.h"
#include "PropertyWidget.h"
#include "CallManage.h"

extern double g_dPixelPerCm;//每厘米像素数
//static GeoIndicatorGenerator m_drawGeo;

TransparentDraggableGujing::TransparentDraggableGujing(QMyCustomPlot *parentPlot,  QString strUuid, double minWidth, QString strTitle)
        : QObject(parentPlot), mPlot(parentPlot), mstrTitle(strTitle), mMinWidth(minWidth)
{
    m_strUuid = strUuid;
    //
    initRect();
}

TransparentDraggableGujing::~TransparentDraggableGujing()
{
    if(mPlot) {
//            mPlot->removeItem(mRect);
//            mPlot->removeItem(mLeftHandle);
//            mPlot->removeItem(mRightHandle);
    }
}


void TransparentDraggableGujing::DrawSVGNormal(QPainter* painter,QString svgFileName,QRectF borderRect,bool IsWellSectonHorizonLayout)
{
    QString svg=svgFileName;
    QRectF boundingRect = painter->transform().mapRect(borderRect);
    painter->save();
    QTransform transform;
    transform.reset();
    if (!IsWellSectonHorizonLayout)
    {
        painter->setWorldTransform(transform);
    }
    else
    {
    }
    QPixmap tiledmap(svg);
    QRect border(boundingRect.left(),boundingRect.top(),boundingRect.width(),boundingRect.height());
    painter->drawPixmap(border,tiledmap);
    painter->restore();
}
//拉伸
void TransparentDraggableGujing::DrawSVGSteched(QPainter* painter,QString svgFileName,QRectF borderRect,bool IsWellSectonHorizonLayout)
{
    QString svg=svgFileName;
    QSvgRenderer m_SvgRenderer;
    m_SvgRenderer.load(svg);
    m_SvgRenderer.render(painter,borderRect);
}
//平铺
void TransparentDraggableGujing::DrawSVGTiled(QPainter* painter,QString svgFileName,QRectF borderRect,bool IsWellSectonHorizonLayout)
{
    QString svg=svgFileName;
    QRectF boundingRect = painter->transform().mapRect(borderRect);
    painter->save();
    QTransform transform;
    transform.reset();
    if (!IsWellSectonHorizonLayout)
    {
        painter->setWorldTransform(transform);
    }
    else
    {
    }
    QPixmap tiledmap(svg);
    painter->drawTiledPixmap(boundingRect,tiledmap);
    painter->restore();
}



//设置最小宽度
void TransparentDraggableGujing::setMinWidth(double minWidth)
{
    mMinWidth = minWidth;
}

//设置标题
void TransparentDraggableGujing::setTitle(QString strTitle)
{
    mstrTitle = strTitle;
    mItemTitle->setText(mstrTitle);
    //mPlot->replot();
}

//设置解释结论
void TransparentDraggableGujing::setResult(QString filePath)
{
    m_Result = filePath;
}

void TransparentDraggableGujing::drawResult(double left_Low, double right_Hight, double lY1, double lY2)
{
    if(m_Result=="")
    {
        return;
    }

    double x1 = mPlot->xAxis->coordToPixel(left_Low);
    double x2 = mPlot->xAxis->coordToPixel(right_Hight);
    double y1 = mPlot->yAxis->coordToPixel(lY1);
    double y2 = mPlot->yAxis->coordToPixel(lY2);

    //
    QString filePath = m_Result;
    //
    QString strLast = filePath.right(4);
    if(strLast.toLower()==".svg")
    {
        QString path,filename;
        GetWellNameAndPath(filePath, filename, path);
        QString basename = filename;

        QString val=filePath;
        QImage image(y2-y1, x1-x2,QImage::Format_RGB32);
        QPainter painter(&image);
        QRectF fillRect(0,0, y2-y1, x1-x2);
        painter.fillRect(fillRect,Qt::white);
        //拉伸
        DrawSVGSteched(&painter,filePath,fillRect,0);
        //平铺
        //DrawSVGTiled(&painter,filePath,fillRect,0);
        //正常
        //DrawSVGNormal(&painter,filePath,fillRect,0);

        val=GetImagePath()+"TempNew";
        QDir ss;
        if(!ss.exists(val)) {
            ss.mkdir(val);
        }
        val+=QDir::separator();
        val+=basename+".png";
        image.save(val);

        //
        mPixmap->setPixmap(QPixmap(val)); // 设置图片
    }
    else
    {
        //mPixmap->setPixmap(QPixmap(filePath)); // 设置图片

        QString path,filename;
        GetWellNameAndPath(filePath, filename, path);
        QString basename = filename;

        QString val=filePath;
        QImage image(y2-y1, x1-x2,QImage::Format_RGB32);
        QPainter painter(&image);
        QRectF fillRect(0,0, y2-y1, x1-x2);
        painter.fillRect(fillRect,Qt::white);
        //平铺
        DrawSVGTiled(&painter,filePath,fillRect,0);

        val=GetImagePath()+"TempNew";
        QDir ss;
        if(!ss.exists(val)) {
            ss.mkdir(val);
        }
        val+=QDir::separator();
        val+=basename+".png";
        image.save(val);

        //
        mPixmap->setPixmap(QPixmap(val)); // 设置图片
    }

    //mPlot->replot();
}

// 设置矩形范围
void TransparentDraggableGujing::setRange(double left_Low, double right_Hight)
{
    if(left_Low >= right_Hight) return;

    double lY1 = mPlot->yAxis->range().lower;//+10
    double lY2 = mPlot->yAxis->range().upper;
    mRect->topLeft->setCoords(left_Low, lY1);
    mRect->bottomRight->setCoords(right_Hight, lY2);

    //位置与rect不一样，否则图像反转
    mPixmap->topLeft->setCoords(right_Hight, lY1);
    mPixmap->bottomRight->setCoords(left_Low,  lY2);
    drawResult(left_Low, right_Hight, lY1, lY2);

    //mItemTitle->position->setCoords(0.5, 0.5);
    //  设置父锚点，定位点
    //mItemTitle->position->setParentAnchor(mRect->bottom);
    mItemTitle->position->setCoords((mRect->topLeft->coords().x() + mRect->bottomRight->coords().x())/2,
                                  (mRect->topLeft->coords().y() + mRect->bottomRight->coords().y())/2); // 设置文本在矩形中心位置

    //mRect->topLeft->setCoords(left, mPlot->yAxis->range().upper);
    //mRect->bottomRight->setCoords(right, mPlot->yAxis->range().lower);

    updateHandles();
    mPlot->replot();
}

// 获取当前范围
QCPRange TransparentDraggableGujing::getRange()
{
    return QCPRange(mRect->topLeft->coords().x(), mRect->bottomRight->coords().x());
}

// 设置矩形颜色
void TransparentDraggableGujing::setColor(const QColor &color)
{
    mRect->setBrush(QBrush(color));
    mRect->setPen(QPen(color.darker()));
    //mPlot->replot();
}

// 删除框图
void TransparentDraggableGujing::deleteRect()
{
    if(mPlot) {

//            mRect->deleteLater();
//            mLeftHandle->deleteLater();
//            mRightHandle->deleteLater();
//            mPixmap->deleteLater();

        mPlot->m_mapDraggable_Gujing.remove(m_strUuid);

        mPlot->removeItem(mRect);
        mPlot->removeItem(mLeftHandle);
        mPlot->removeItem(mRightHandle);
        mPlot->removeItem(mPixmap);
        mPlot->removeItem(mItemTitle);

        mPlot->replot();
        this->deleteLater();

        //
//            //避免二次绘制框图
//            mPlot->m_bDrawRect = false;
//            mDragMode = DragNone;
//            //取消选中框
//            mPlot->selectionRect()->cancel();
//            mPlot->replot();
//            mPlot->selectionRect()->mActive=true;
    }
}


void TransparentDraggableGujing::initRect()
{
    // 创建透明矩形
    mRect = new QCPItemRect(mPlot);
    mRect->setLayer("overlay"); // 确保在最上层
    mRect->setBrush(QBrush(QColor(255, 255, 255, 50))); // 半透明蓝色
    mRect->setPen(QPen(QColor(70, 70, 255, 200)));

    // 创建左右边界控制点
    mLeftHandle = new QCPItemRect(mPlot);
    mLeftHandle->setLayer("overlay");
    mLeftHandle->setBrush(QBrush(Qt::red));
    mLeftHandle->setPen(QPen(Qt::darkRed));

    mRightHandle = new QCPItemRect(mPlot);
    mRightHandle->setLayer("overlay");
    mRightHandle->setBrush(QBrush(Qt::red));
    mRightHandle->setPen(QPen(Qt::darkRed));

    // 设置初始位置
    //double center = mPlot->xAxis->range().center();
//        setRange(center - 10, center + 10);

    // 连接鼠标事件
    connect(mPlot, &QCustomPlot::mousePress, this, &TransparentDraggableGujing::onMousePress);
    connect(mPlot, &QCustomPlot::mouseMove, this, &TransparentDraggableGujing::onMouseMove);
    connect(mPlot, &QCustomPlot::mouseRelease, this, &TransparentDraggableGujing::onMouseRelease);

    mPixmap = new QCPItemPixmap(mPlot);
    //mPixmap->setPixmap(QPixmap(":/image/file.png")); // 设置图片
    mPixmap->setScaled(true, Qt::IgnoreAspectRatio); // 设置缩放方式
    mPixmap->setLayer("overlay"); // 确保在最上层

    mItemTitle = new QCPItemText(mPlot);
    mItemTitle->setText(mstrTitle);
    //mItemTitle->setBrush(QBrush(Qt::red));
    mItemTitle->setFont(QFont("Arial", 12, QFont::Bold));
    mItemTitle->setColor(Qt::black);
    mItemTitle->setPositionAlignment(Qt::AlignTop | Qt::AlignHCenter);
    mItemTitle->position->setType(QCPItemPosition::ptPlotCoords);
    //mItemTitle->position->setType(QCPItemPosition::ptAxisRectRatio);
    mItemTitle->position->setCoords(0.5, 0);
    mItemTitle->setLayer("overlay");
}

void TransparentDraggableGujing::updateHandles()
{
    // 左边界矩形控制点
    mLeftHandle->topLeft->setParentAnchor(mRect->topLeft);
    mLeftHandle->bottomRight->setParentAnchor(mRect->topRight);//(mRect->bottomLeft);
    mLeftHandle->topLeft->setCoords(-0.5, 0.5);      // 矩形大小
    mLeftHandle->bottomRight->setCoords(0.5, -0.5);  // 矩形大小

    // 右边界矩形控制点
    mRightHandle->topLeft->setParentAnchor(mRect->bottomLeft);
    mRightHandle->bottomRight->setParentAnchor(mRect->bottomRight);
    mRightHandle->topLeft->setCoords(-0.5, 0.5);      // 矩形大小
    mRightHandle->bottomRight->setCoords(0.5, -0.5);  // 矩形大小

}

//分割
void TransparentDraggableGujing::onSplitRect()
{
    QCPRange currentRange = getRange();
    //分割后显示上半部分
    setRange((currentRange.lower+currentRange.upper)/2.0, currentRange.upper);

    //添加下半部分
    mPlot->addGujingToPlot(currentRange.lower, (currentRange.lower+currentRange.upper)/2.0, m_Result);

    double low = mRect->topLeft->coords().x();
    double hight = mRect->bottomRight->coords().x();
    PropertyService()->initGujingItemProperty(this, low, hight, m_Result);
    //保存
    mPlot->SaveToSLF_Gujing();

    //取消所有选中单元格
    emit CallManage::getInstance()->sig_Raise(mPlot->m_strUuid, "", "", "", "", 1, "");
}

//删除
void TransparentDraggableGujing::onDelRect()
{
    //mDragMode = DragNone;
    //删除框图
    deleteRect();
    //保存
    mPlot->SaveToSLF_Gujing();
    //属性清空
    PropertyService()->InitCurrentViewInfo();
}

//设置深度移动量
void TransparentDraggableGujing::setItemDepthOffset()
{
    bool ok=0;
    double depthshift=QInputDialog::getDouble(NULL,"深度移动","请输入移动的深度量(上移-,下移+)",0.0,-2147483647, 2147483647,4,&ok);
    if(!ok) return;

    QCPRange currentRange = getRange();
    QCPRange newRange = currentRange;

    newRange.lower = currentRange.lower-depthshift;
    newRange.upper = currentRange.upper-depthshift;

    //
    double width = currentRange.size();
//    //double center = mDragStartRange.center() + dx;
//    double center = currentRange.center() - depthshift;
//    newRange.lower = center - width/2;
//    newRange.upper = center + width/2;

    // 检查是否超出轴范围
    if(newRange.lower < getMyLower()) {
        return;
    }
    else if(newRange.upper > getMyUpper()) {
        return;
    }
    //
    setRange(newRange.lower, newRange.upper);

    {
//        double low = mRect->topLeft->coords().x();
//        double hight = mRect->bottomRight->coords().x();
//        PropertyService()->initGujingItemProperty(this, low, hight, m_Result);

        //保存
        mPlot->SaveToSLF_Gujing();

        //属性清空
        PropertyService()->InitCurrentViewInfo();

        //取消所有选中单元格
        emit CallManage::getInstance()->sig_Raise(mPlot->m_strUuid, "", "", "", "", 1, "");
    }
}

//设置顶深
void TransparentDraggableGujing::setUpper(double upper)
{
    QCPRange currentRange = getRange();
    QCPRange newRange = currentRange;

    double proposedRight = upper;
    // 确保不超出轴范围且不使宽度小于最小值
    newRange.upper = qBound(
        currentRange.lower + mMinWidth,
        proposedRight,
        getMyUpper());

    // 最终确保宽度不小于最小值（针对整体拖动的情况）
    if(newRange.size() < mMinWidth) {
        newRange.upper = newRange.lower + mMinWidth;
    }

    setRange(newRange.lower, newRange.upper);
}

//设置底深
void TransparentDraggableGujing::setLower(double lower)
{
    QCPRange currentRange = getRange();
    QCPRange newRange = currentRange;

    double proposedLeft = lower;
    // 确保不超出轴范围且不使宽度小于最小值
    newRange.lower = qBound(
        getMyLower(),
        proposedLeft,
        currentRange.upper - mMinWidth);

    // 最终确保宽度不小于最小值（针对整体拖动的情况）
    if(newRange.size() < mMinWidth) {
        // 如果是边界拖动，强制设置最小宽度
        newRange.lower = newRange.upper - mMinWidth;
    }

    setRange(newRange.lower, newRange.upper);
}

void TransparentDraggableGujing::onMousePress(QMouseEvent *event)
{
    if(event->button() != Qt::LeftButton)//右键
    {
        double y = mPlot->xAxis->pixelToCoord(event->pos().y());//x轴展示深度
        QCPRange currentRange = getRange();
        if(mLeftHandle->selectTest(event->pos(), false) < 5) {
            mDragMode = DragNone;
        }
        else if(mRightHandle->selectTest(event->pos(), false) < 5) {
            mDragMode = DragNone;
        }
        //else if(x >= currentRange.lower && x <= currentRange.upper) {
        else if(y >= currentRange.lower && y <= currentRange.upper) {
            mDragMode = DragNone;
        }
        else {
            mDragMode = DragNone;
            return;
        }

        //event->accept();

        double low = mRect->topLeft->coords().x();
        double hight = mRect->bottomRight->coords().x();
        PropertyService()->initGujingItemProperty(this, low, hight, m_Result);

        QMenu menu(nullptr);
        menu.addAction(QIcon(::GetImagePath() +  "icon/Split.png"), "分割", this, &TransparentDraggableGujing::onSplitRect);
        menu.addAction(QIcon(::GetImagePath() +  "icon/Delete.png"), "删除选中对象", this, &TransparentDraggableGujing::onDelRect);
        menu.addAction(QIcon(::GetImagePath() +  "icon/Shift.png"), "设置深度移动量", this, &TransparentDraggableGujing::setItemDepthOffset);
        menu.exec(event->globalPos());

        return;
    }

    event->accept();

    // 检查点击了哪个部分
    //double x = mPlot->xAxis->pixelToCoord(event->pos().x());
    //double y = mPlot->yAxis->pixelToCoord(event->pos().y());

    double y = mPlot->xAxis->pixelToCoord(event->pos().y());//x轴展示深度

    QCPRange currentRange = getRange();

    if(mLeftHandle->selectTest(event->pos(), false) < 5) {
        mDragMode = DragLeft;
    }
    else if(mRightHandle->selectTest(event->pos(), false) < 5) {
        mDragMode = DragRight;
    }
    //else if(x >= currentRange.lower && x <= currentRange.upper) {
    else if(y >= currentRange.lower && y <= currentRange.upper) {
        mDragMode = DragRect;        
    }
    else {
        mDragMode = DragNone;
        return;
    }

    //mDragStartX = x;
    mDragStartY = y;
    mDragStartRange = currentRange;

}

void TransparentDraggableGujing::onMouseMove(QMouseEvent *event)
{
    if(mDragMode == DragNone) return;

    event->accept();

    //double x = mPlot->xAxis->pixelToCoord(event->pos().x());
    //double dx = x - mDragStartX;

    double y = mPlot->xAxis->pixelToCoord(event->pos().y());
    double dy = y - mDragStartY;

    QCPRange newRange = mDragStartRange;

    switch(mDragMode) {
    case DragLeft: {
        //double proposedLeft = mDragStartRange.lower + dx;
        double proposedLeft = mDragStartRange.lower + dy;
        // 确保不超出轴范围且不使宽度小于最小值
        newRange.lower = qBound(
            //mPlot->xAxis->range().lower,
            getMyLower(),
            proposedLeft,
            mDragStartRange.upper - mMinWidth);
        break;
    }
    case DragRight: {
        //double proposedRight = mDragStartRange.upper + dx;
        double proposedRight = mDragStartRange.upper + dy;
        // 确保不超出轴范围且不使宽度小于最小值
        newRange.upper = qBound(
            mDragStartRange.lower + mMinWidth,
            proposedRight,
            getMyUpper());
            //mPlot->xAxis->range().upper);
        break;
    }
    case DragRect: {
        double width = mDragStartRange.size();
        //double center = mDragStartRange.center() + dx;
        double center = mDragStartRange.center() + dy;
        newRange.lower = center - width/2;
        newRange.upper = center + width/2;

        // 检查是否超出轴范围
        if(newRange.lower < getMyLower()) {
            newRange.lower = getMyLower();
            newRange.upper = newRange.lower + width;
        }
        else if(newRange.upper > getMyUpper()) {
            newRange.upper = getMyUpper();
            newRange.lower = newRange.upper - width;
        }

//            QCPRange axisRange = mPlot->xAxis->range();
//            if(newRange.lower < axisRange.lower) {
//                newRange.lower = axisRange.lower;
//                newRange.upper = newRange.lower + width;
//            }
//            else if(newRange.upper > axisRange.upper) {
//                newRange.upper = axisRange.upper;
//                newRange.lower = newRange.upper - width;
//            }
        break;
    }
    default:
        break;
    }

//        //取整数(方便显示统计，左右边界整数显示。)
//        newRange.lower = (int)newRange.lower;
//        QCPRange rangeByFile = mPlot->xAxis->range();
//        if (std::fabs(rangeByFile.upper - (int)newRange.upper) >= 1.0)
//        {
//            newRange.upper = (int)newRange.upper;
//        }

    // 最终确保宽度不小于最小值（针对整体拖动的情况）
    if(newRange.size() < mMinWidth) {
        if(mDragMode == DragRect) {
            // 如果是整体拖动，保持中心点不变
            double center = newRange.center();
            newRange.lower = center - mMinWidth/2;
            newRange.upper = center + mMinWidth/2;
        } else {
            // 如果是边界拖动，强制设置最小宽度
            if(mDragMode == DragLeft) {
                newRange.lower = newRange.upper - mMinWidth;
            } else if(mDragMode == DragRight) {
                newRange.upper = newRange.lower + mMinWidth;
            }
        }
    }

    setRange(newRange.lower, newRange.upper);

}

void TransparentDraggableGujing::onMouseRelease(QMouseEvent *event)
{
    if(event->button() == Qt::LeftButton && mDragMode != DragNone) {
        event->accept();
        //属性
        //if(mDragMode == DragRect)
        {
            double low = mRect->topLeft->coords().x();
            double hight = mRect->bottomRight->coords().x();
            PropertyService()->initGujingItemProperty(this, low, hight, m_Result);
            //保存
            mPlot->SaveToSLF_Gujing();

            //取消所有选中单元格
            emit CallManage::getInstance()->sig_Raise(mPlot->m_strUuid, "", "", "", "", 1, "");
        }

        //避免二次绘制框图
        mPlot->m_bDrawRect = false;
        //emit rangeChanged(getRange());
        mDragMode = DragNone;
        //取消选中状态
//            QCPDataSelection emptySelection;
//            mPlot->graph(0)->setSelection(emptySelection);
//            mPlot->replot();

        //取消选中框
        mPlot->selectionRect()->cancel();
        mPlot->replot();
        mPlot->selectionRect()->mActive=true;

    }
}

double TransparentDraggableGujing::getMyLower()
{
    double dLower = mPlot->xAxis->range().lower;
    double proposedLeft = mDragStartRange.lower;

    TransparentDraggableGujing *pDraggableRect =NULL;
    {
        QMap<QString,QObject *>::Iterator it = mPlot->m_mapDraggable_Gujing.begin();
        while( it != mPlot->m_mapDraggable_Gujing.end() )
        {
            if(it.key() == m_strUuid)
            {
                it++;
                continue;
            }
            pDraggableRect = (TransparentDraggableGujing*)it.value();
            //
            QCPRange tmpRange = pDraggableRect->getRange();
            if(tmpRange.upper >= dLower && tmpRange.upper <= proposedLeft)
            {
                dLower = tmpRange.upper;
            }
            it++;
        }
    }

    return dLower;
}

double TransparentDraggableGujing::getMyUpper()
{
    double dUpper = mPlot->xAxis->range().upper;
    double proposedRight = mDragStartRange.upper;

    TransparentDraggableGujing *pDraggableRect =NULL;
    {
        QMap<QString,QObject *>::Iterator it = mPlot->m_mapDraggable_Gujing.begin();
        while( it != mPlot->m_mapDraggable_Gujing.end() )
        {
            if(it.key() == m_strUuid)
            {
                it++;
                continue;
            }
            pDraggableRect = (TransparentDraggableGujing*)it.value();
            //
            QCPRange tmpRange = pDraggableRect->getRange();
            if(tmpRange.lower <= dUpper && tmpRange.lower >= proposedRight)
            {
                dUpper = tmpRange.lower;
            }
            it++;
        }
    }

    return dUpper;
}