logplus/logPlus/qmycustomplot.h

#ifndef QMYCUSTOMPLOT_H
#define QMYCUSTOMPLOT_H

#include "qcustomplot.h"
#include "LogIO.h"
#include "QCPSizeHandleManager.h"
#include "qtColorSchemeComboBox.h"
#include "formtrack.h"

#pragma execution_character_set("utf-8")

const int iFracType=15;

//
#define SideWallCoreWidth  1.2
#define SideWallCoreHeight 0.5

struct Slf_TxtPOS {
    int Order;
    float Depth;
    float CorrDepth;
};

struct Slf_JIEGUPOS {
    int Order;
    float Depth;
    float Number;
    char  Dest[64];
};

typedef struct
{
    int iCode; 		//代码
    QString Fac;	//相
    QString Phase;	//亚相
    QString mFac;	//微相
}FAC_DEF;

typedef struct
{
    int no;
    float sdep;
    float edep;
    char Fac[32];
    char Phase[32];
    char mFac[32];
    char Dest[32];
}FAC_TABLE;

class TransparentGroupResult;
class QMyCustomPlot : public QCustomPlot
{
    Q_OBJECT
public:
    QMyCustomPlot(QWidget *parent = nullptr, QString strSlfName="", QString strWellName="", QString strTrackName="", QString strLineName="");

    virtual ~QMyCustomPlot()
    {
    }

	void initGeometry(QString strUuid, int nscale, int nW);

	void changePropertyWaveUpdate();
	// 绘图类型-变密度(成像)
	void initWave(QString strSlfName, QString strWaveName);
	// 绘图类型-波形
	void initWave2(QString strSlfName, QString strWaveName);
	
	void initColorTable();
	void setSchemeIndex(int nidx, int colorNum);
	double** getWavedata(int nrow, int ncol);
	QCPColorMap * updateWave();

	float getScaleV();

	void groupBeginResult(float fEndDepth, float fStartDepth);
	void groupEndResult();

	// 设置解释结论属性
	void setShowProperty(QVariant val, int ntag);
	void setConclusionProportion(int nCopro);
	void setShowPos(int nSPos);

    //道宽改变后，避免井壁取心等组件变形，需要重新刷新
    void resetPosition();
    //固井结论
    void resetPosition_Gujing();
    //井壁取心
    void resetPosition_SwallCore();
    //录井剖面
    void resetPosition_GeoLith();
    //地质层位
    void resetPosition_Layer();

protected:
    //virtual void mouseMoveEvent(QMouseEvent *event);

public:
	// 井UUID
    QString m_strUuid;
    QString m_strSlfName;
    QString m_strWellName;
    QString m_strTrackName;
    QString m_strLineName;

    FormTrack *m_formTrack = NULL;

    //
    float m_iX1, m_iX2;
    float m_iY1, m_iY2;
	qint8 m_nLeftCross = 0;		// 左跨道个数
	qint8 m_nRightCross = 0;	// 右跨道个数

    //填充曲线
    QCPGraph *graph_Fill=nullptr;
    //对称曲线
    QCPGraph *graph_Symmetry=nullptr;

    //其他曲线
    QString m_newFillType;
    QString m_newTargetLine;
    QColor m_newColor;
    QString m_newLithosImage;
    QString m_newHeadFill;
    float m_vMin;
    float m_vMax;
    QString m_strOtherScaleType;
    QString m_strScaleType="线性";//刻度类型（线性，对数）

    //绘制方式
    bool m_bDrawLine = true;    // 曲线
    bool m_bDrawGan = false;    // 杆状
    bool m_bDrawPoint = false;  // 点状
    bool m_bDrawSymmetry = false; // 绘制对称曲线
    QCPScatterStyle::ScatterShape m_pointStyle=QCPScatterStyle::ssCircle;//数据点，符号类型，圆，三角等

    QColor m_frontColor;//岩性前景色
    QColor m_backColor;//岩性背景色
    QString m_newFillMode;
    bool m_bFillNow = true;

    QContextMenuEvent *m_event;

    bool m_bDrawRect = true;
    bool m_bX2Y = true;

    //
    bool m_bDrawCore_PHYSICS = false;    //岩心分析
    int dataIndex = -1;
    bool singleDragMove = false;
    float singleOldPosition = 0;

	QCPColorMap *m_colorMap = NULL;
	QCPColorScale * m_colorScale = NULL;
	double** m_wavedata = NULL;
	int m_nRow = 0;
	int m_nCol = 0;
	int m_nDrawType = 3;	// 绘图类型
	// 0.全周 1.正半周 2.负半周
	int m_nMode = 1;
	float m_fScaleV = 0.0f;
	float m_fmin;
	float m_fmax;
	int m_nColorNum = 256;
	int m_nSchemeIndex = 1;
	bool m_bDrawDepth = false;		// 绘制波深度
	bool m_bDrawBase = false;		// 绘制波基线
	bool m_bOddEven = false;		// 奇偶配色
	float m_Base = 0.0f;			// 波列基值
	float m_MaxRange = 1023.0f;
	int m_nWaveJg = 100;
	int m_nWaveHei = 1;

    // 深度 第三个轴
    QCPAxis *m_yAxis2 = nullptr;
    QCPAxis *m_yAxis3 = nullptr;  // 保存指针
public:
	bool	m_bEditor = false; // 编辑状态
	QCPItemStraightLine* m_pAddLine1 = NULL;
	QCPItemStraightLine* m_pAddLine2 = NULL;

	QString m_strGroupUid = "";
	// 解释结论终止深度
	float m_fResultEndDepth = 0.0f;
    QVector<double> m_x;
    QVector<double> m_y;
    int m_iCurNum=0;
    //分段刷新
    int m_iSplitNum=2000; //2000000; //2000;
    bool m_addRandomGraph=false;//当前是否绘制曲线 true:是。
    bool m_bEditRect=false;     //当前是否正在编辑曲线。
    bool m_bFirstTimeConnect=true;     //初次绑定编辑曲线信号槽。
    bool m_bPriviewRightList=false;    //当前是否正在预览曲线。

	// 组
	QMap<QString, QObject*> m_mapDragGroup;

    QMap<QString, QObject*> m_mapDraggable_Rect;        //文字结论
    QMap<QString, QObject*> m_mapDraggable_Layer;       //地质分层
    QMap<QString, QObject*> m_mapDraggable_Result;      //解释结论
    QMap<QString, QObject*> m_mapDraggable_GeoLith;     //录井剖面
    QMap<QString, QObject*> m_mapDraggable_SwallCore;   //井壁取心
    QMap<QString, QObject*> m_mapDraggable_Gujing;      //固井
    QMap<QString, QObject*> m_mapDraggable_Image;       // 岩心照片
    QMap<QString, QObject*> m_mapDraggable_MFac;        //微相
    QMap<QString, QObject*> m_mapDraggable_Phase;       //亚相
    QMap<QString, QObject*> m_mapDraggable_Fac;         //相
    QMap<QString, QObject*> m_mapDraggable_Guan;
    QMap<QString, QObject*> m_mapDraggable_Jiegutext;
    QMap<QString, QObject*> m_mapDraggable_Line;
    QMap<QString, QObject*> m_mapDraggable_SelectRect;
    QMap<QString, QObject*> m_mapDraggable_RightList;
    QMap<QString, QObject*> m_mapDraggable_CorePhysics; // 岩心分析


    QObject* m_SelectShiftLine=nullptr;//当前选中的分段线
    QObject* m_SelectRect=nullptr;//当前选中的曲线编辑框

    //固井
    QMap<QString,QString> zoneOrder_Gujing;
    bool SaveToSLF_Gujing();
    QString GetIntResult_Gujing(QString result);
    void AddTableToWellRound(); //将表，添加到左侧树图
    bool CopyToSLFFile(QString targetSLFFileName, bool deleteFromSrc, char*newCurveName);
    bool LoadFromSLF_Gujing(QString strSlfName, QString strLineName);

    // 岩心图片
    QMap<QString,QString> zoneOrderImage;
    bool SaveToSLFImage();
    bool LoadFromIMAGE_SLF(QString strSlfName, QString strLineName);

    // 岩心分析
    QMap<QString,QString> zoneOrderCorePhysics;
    bool saveToSLFCorePhysics();
    bool loadFromSLFCorePhysics(QString strSlfName, QString strLineName);

    //井壁取心
    QStringList liths_SWallCore;
    QStringList oils_SWallCore;
    QStringList colors_SWallCore;
    QStringList colorinds_SWallCore;
    bool SaveToSLF_SwallCore();
    bool LoadFromSLF_SwallCore(QString strSlfName, QString strLineName);

    //录井剖面
    QMap<QString,QString> OilOrder;
    QMap<QString,QString> LithOrder;
    QMap<QString,QString> ColorOrder;
    QMap<QString,QString> ColorInds;
    QStringList LithWidth;
    bool m_bLithColor = true;       // 岩性配色显示
    bool m_bLithOne = true;         // 单岩性显示
    bool m_bShowOil = true;         // 显示含油性
    bool m_bCenterOil = false;      // 含油性居中
    bool m_bShowColor = false;      // 显示颜色
    bool m_bShowColorNum = false;   // 绘制颜色号
    double m_dOilZhan = 8; //含油占比
    QString GetIntLith(QString Lith);
    QString GetIntOil(QString Oil);
    QString GetIntColor(QString Color);
    bool SaveToSLF_GeoLith();
    bool LoadFromSLF_GeoLith(QString strSlfName, QString strLineName);

    //文字结论
    bool SaveToSLF_Text();
    bool LoadFromSLF_Text(QString strSlfName, QString strLineName);

    //地质层位
    bool SaveToSLF_Layer();
    bool LoadFromSLF_Layer(QString strSlfName, QString strLineName);

    //气测/FMT/射孔/文本
    QStringList m_FieldNameList;
    QStringList m_FieldHZNameList;
    QStringList m_FieldUnitList;
    QStringList m_FieldHZUnitList;
    QList<int> ValueTypes;
    QStringList CoreValues;
    bool LoadFromSLF_Jiegutext(QString strSlfName, QString csCurve, QString strAliasName);
    bool SaveToSLF_Jiegutext();

    //沉积相
    QList <FAC_DEF> m_FracDef;
    QList <FAC_TABLE> m_ObjList_Fac;
    QCPItemStraightLine *m_qcpItemLine=nullptr;
    QCPItemStraightLine *m_qcpItemLine2=nullptr;
    //沉积相
    bool m_bDrawFac = true;       // 绘制相
    bool m_bDrawPhase = true;     // 绘制亚相
    bool m_bDrawMFacName = true;  // 微相名称
    void ReadFracDef();
    void ReadData_Fac(QString strSlfName, QString csCurve, bool bAdd=true);
    void DrawFac(int iType);
    bool LoadFromSLF_Fac(QString strSlfName, QString csCurve, bool bAdd=true);
    //保存
    void SaveToSLF_Fac();

    //套管組件
    bool m_bDrawStruct_Tubing = true;   //绘制结构
    bool m_bDrawTubing_Tubing = true;   //绘制管柱
    bool m_bDrawTools_Tubing = true;    //绘制工具
    bool m_bDrawSPTool_Tubing = true;   //标注工具
    bool m_bDrawCCL_Tubing = false;     //绘制接箍
    float m_Oguan_Tubing = 63.5;        //油管外径
    float m_inD_Tubing = 121.36;        //套管内径
    float m_OutD_Tubing = 139.7;        //套管外径
    //
    QMap<QString,QString> zoneOrder_Tubing;
    QString cclimgpath_Tubing="";
    QList<Slf_JIEGUPOS> m_pResultList_Tubing;
    QString m_strAddTubing="";    
    QCPItemRect *mRect_Tubing=nullptr;      //套管左侧图像
    QCPItemRect *mRect2_Tubing=nullptr;     //套管右侧图像
    QCPItemPixmap *mPixmap_Tubing=nullptr;  //管柱图像
    double m_depth_Tubing = 0;              //管柱深度
    bool LoadFromSLF_Tubing(QString strSlfName, QString csCurve);
    void drawOne_Tubing(Slf_JIEGUPOS result);
    bool SaveToSLF_Tubing();
    //绘制结构
    void DrawStruct();
    //绘制管柱
    void DrawTubing();
    //组件改变后，重绘管柱
    bool LoadFromSLF_ReDrawTubing(QString strSlfName, QString csCurve);
    //检查套管组件名称，是否需要更新套管图形
    bool checkTubingName(QString m_Result);

public slots:
    void slot_time();

public:
    void init(QString strName, QVector<double> x, QVector<double> y);

    //岩心照片
    void addImageToPlot(double left_Low, double right_Hight, const QString imagePath);
    void addImageToPlot(double left_Low, double right_Hight, const QString imagePath, double left, double width);
    // left_Low底, right_Hight高 imagePath图片 left左边距 width宽 mBorderColor边框颜色、 mBorderStyle边框样式 mBorderWidth边框宽
    void addImageToPlot(double left_Low, double right_Hight, const QString imagePath, double left, double width, QColor mBorderColor, Qt::PenStyle mBorderStyle, int mBorderWidth);

    //曲线
    void addRandomGraph(QVector<double> x, QVector<double> y, QString strSlfName, QString strLineName, QString strAliasName, QString strUnit,
                        double newLeftScale, double newRightScale, QString strScaleType, QColor &newlineColor, double width, Qt::PenStyle lineStyle);

    //文字结论
    void addTextToPlot(double left_Low, double right_Hight, const QString strText, bool bRefresh=true, QColor crColor=QColor(255, 255, 255, 80));

    //地质分层
    void addLayerToPlot(double left_Low, double right_Hight, const QString strText, bool bRefresh=true, QColor crColor=QColor(255, 255, 255, 80));

    //解释结论
	TransparentGroupResult* addResultGroup(double left_Low, double right_Hight, QString &strUuid, QString strText = "");
    void addResultToPlot(double left_Low, double right_Hight,  QString myResult, QString &strUuid, QString strText="");

    //录井剖面
    void addGeoLithToPlot(double left_Low, double right_Hight, const QString myLith, const QString myOil, const QString myColor, bool bRefresh=true);

    //井壁取心
    void addSwallCoreToPlot(double Depth, QString LithologyImage, QString OilGasImage, QString ColorImage, double Sideleft, double width, int iColor, bool bRefresh=true);

    //固井结论
    void addGujingToPlot(double left_Low, double right_Hight, const QString strResult, bool bRefresh=true);

    //气测/FMT/射孔/文本
    void addJiegutextToPlot(double left_Low, double right_Hight, const QStringList strText, const QStringList strList_coredat, bool bRefresh=true, QColor crColor=QColor(255, 255, 255, 80));

    //沉积相
    void addMFacToPlot(double left_Low, double right_Hight, const QString strText, bool bRefresh=true, QColor crColor=QColor(255, 255, 255, 80));
    void addPhaseToPlot(double left_Low, double right_Hight, const QString strText, bool bRefresh=true, QColor crColor=QColor(255, 255, 255, 80));
    void addFacToPlot(double left_Low, double right_Hight, const QString strText, bool bRefresh=true, QColor crColor=QColor(255, 255, 255, 80));

    //套管组件
    void addGuanToPlot(double left_Low, double right_Hight, const QString imagePath, float in, bool bRefresh=true);

    //校深线段
    void addLineToPlot(double left_Low, double right_Hight, const QString strText, QColor crColor=QColor(255, 255, 255, 80));

    //框选并编辑曲线
    void addSelectRectToPlot(double left_Low, double right_Hight, int left_Low_Number, int right_Hight_Number);

    //预览
    void addRightListToPlot( QList<double> new_DepthList, QList<double> new_ValueList);

public slots:
	void slotSelectionRectAccepted(const QRect &rect, QMouseEvent *event);

    void s_LineClicked(int index);
    void onResetZoom();
    void removeSelectedGraph();
    void removeSelectedGraphByTitle();

    void s_Raise(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, int iTableType, QString strFormInfoType);

    //属性
    //左刻度
    void s_ChangeLeftScale(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, double newLeftScale);
    //右刻度
    void s_ChangeRightScale(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, double newRightScale);
    //刻度类型
    void s_ChangeScaleType(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, QString strScaleType);

    //线颜色
    void s_ChangeLineColor(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, QColor lineColor);
    //线宽
    void s_ChangeLineWidth(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, double width);
    //线型
    void s_ChangeLineStyle(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, Qt::PenStyle lineStyle);

    //绘制方式
    void ChangeDrawMethod(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName);
    //曲线
    void s_ChangeDrawLine(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, bool bDrawLine);
    //杆状
    void s_ChangeDrawGan(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, bool bDrawGan);
    //点状
    void s_ChangeDrawPoint(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, bool bDrawPoint);
    //绘制对称曲线
    void s_ChangeDrawSymmetry(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, bool bDrawSymmetry);
    //改变曲线名
    void s_changeLineName(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, QString strNewLineName);
    //数据点 符号类型
    void s_ChangePointStyle(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, QCPScatterStyle::ScatterShape pointStyle);

    //岩性填充-不填充
    void s_ClearFillMode(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName);
    //岩性填充-填充
    void s_ChangeFillMode(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName,
                          QString newFillType, QString newTargetLine, QColor newColor, QString newLithosImage, QString newHeadFill,
                          float vMin, float vMax,  QString strOtherScaleType, QColor frontColor, QColor backColor, QString newFillMode, bool bFillNow);


    //右键--添加分段线
    void onAddShiftLine();
    //校深线段
    void s_AddShifLineToPlot(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, double left_Low, double right_Hight);

    //右键--清除当前分段线
    void onDelSelectShiftLine();
    //清除当前分段线
    void s_DelSelectShiftLineFromPlot(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName);

    //右键--清除全部分段线
    void onDelAllShiftLine();
    //清除全部分段线
    void s_DelAllShiftLineFromPlot(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName);

    //右键--编辑曲线
    void onEditLine();

    //通用
    void ClearSelectItems();    //取消选中

    //右键--编辑固井
    void onEditGujing();    
    void addItems_Gujing();     //从剪切板文本数据粘贴
    void DeleteItems_Gujing();  //全部清空
    void RefreshItems_Gujing(); //刷新数据
    void MegResult_Gujing();    //合并结论

    //右键--编辑岩心照片
    void onEditImage();
    void addItemsImage();     //从剪切板文本数据粘贴
    void deleteItemsImage();  //全部清空
    void refreshItemsImage(); //刷新数据

    //右键--编辑岩心分析
    void addCorePhysics();      // 增加
    void addCorePhysicsWithParam(int Order = 0, double Depth = 0.0, double CorrDepth = 0.0, double CoreValue = 0.0);
    void pasteCorePhysics();     //从剪切板文本数据粘贴
    void deleteCorePhysics();  //全部清空
    void refreshCorePhysics(); //刷新数据

    //右键--编辑井壁取心
    void addItem_SWallCore();       //增加井壁取心
    void moveItems_SWallCore();     //平移水平位置
    void addItems_SWallCore();      //从剪切板文本数据粘贴
    void DeleteItems_SWallCore();   //全部清空
    void RefreshItems_SWallCore();  //刷新数据
    void AddItem_SWallCore(QStringList lists);

    //右键--编辑录井剖面
    void onEditGeoLith();
    void addItems_GeoLith();     //从剪切板文本数据粘贴
    void DeleteItems_GeoLith();  //全部清空
    void RefreshItems_GeoLith(); //刷新数据
    void AddItem_GeoLith(QStringList lists);

    //右键--编辑文字结论
    void onEditText();
    void addItems_Text();     //从剪切板文本数据粘贴
    void DeleteItems_Text();  //全部清空
    void RefreshItems_Text(); //刷新数据
    void AddItem_Text(QStringList lists);

    //右键--编辑地质分层
    void onEditLayer();
    void addItems_Layer();     //从剪切板文本数据粘贴
    void DeleteItems_Layer();  //全部清空
    void RefreshItems_Layer(); //刷新数据
    void AddItem_Layer(QStringList lists);

    //右键--气测-管柱-文本-FMT-射孔
    void addItems_Jiegutext();     //从剪切板文本数据粘贴
    void DeleteItems_Jiegutext();  //全部清空
    void RefreshItems_Jiegutext(); //刷新数据
	
    //右键--沉积相
    void addItem_Fac();         //添加沉积相
    void RefreshItems_Fac(bool bAdd=true);    //刷新数据

    //右键--套管组件
    void addItem_Tubing(); //添加套管组件
    void addItems_Tubing();     //从剪切板文本数据粘贴
    void DeleteItems_Tubing();//全部清空
    void RefreshItems_Tubing();    //刷新数据

	//右键--解释结论
	void onOpenEditResult();
	void onCloseEditResult();
	void DeleteItemGroup();
	void updateGroupZone(); //更新层号

	bool SaveToSLF_Result();

	TransparentGroupResult* getCurGroupResult(double x_val);
	// 筛选出选中的Group， 并且排序
	QMap<double, TransparentGroupResult*> getSelectGroupResult();
	void segmentationInnerLayer(); // 分割为层内层
	void segmentationIndependentLayer(); // 分割为独立层
	void splitIndependentLayer(); // 拆分复合层成独立层
	void megResultLayer();// 合并

	bool getIsEditor();
    //
    void addItems_Core();

    //执行校正
    void s_RuncorFromPlot(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName);

    //执行拼接
    void s_MergeFromPlot(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName);

    //执行预览
    void s_PreMergeFromPlot(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName);
    void s_PreMerge_FromRightList(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, QList<double> new_DepthList, QList<double> new_ValueList);
    //关闭预览框
    void s_PreMerge_Close(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName);

    //Plot重新加载数据
    void s_ReloadPlot(QString strUuid, QString strSlfName, QString strLineName);

	void s_changeDrawProperty(QVariantList vlist);
    // 深度
    void s_changeDepthProperty(QVariantList vlist);

    // 岩心分析
    void s_changeCorePhysicsProperty(QVariantMap vlist);

    void onAddRect();

    //蝌蚪图重绘网格线
    void drawCustomElements();

    //改变固井曲线名
    void s_changeGujingLine(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, QString strNewLineName);

    //改变曲线名 //气测/FMT/射孔/文本
    void s_changeJiegutextLine(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, QString strNewLineName);
    void s_changeJiegutextTitle(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, QString strAliasName);


    //改变录井剖面属性
    void s_changeGeoLithLine(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, double dOilZhan);
    //是否显示
    void s_changeGeoLithShow(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, QString propertyData, bool bShow);

    //改变沉积相属性，是否显示
    void s_changeFacShow(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, QString propertyData, bool bShow);

    //改变套管组件属性，是否显示
    void s_changeGuanShow(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, QString propertyData, bool bShow);

    //改变套管组件属性，直径
    void s_changeGuanD(QString strUuid, QString strSlfName, QString strWellName, QString strTrackName, QString strLineName, QString propertyData, double newD);

public:
    //蝌蚪图重绘网格线
    bool mKedou = false;
    //
    bool mMousePress = false;
	double m_dPressX = 0;
    QPoint mLastPos;
    QCPSizeHandleManager *mSizeHandleManager;
	virtual void mouseDoubleClickEvent(QMouseEvent *event);
    virtual void mousePressEvent(QMouseEvent *event);
    virtual void mouseMoveEvent(QMouseEvent *event);
    virtual void mouseReleaseEvent(QMouseEvent *event);

    //单点移动功能
    void executeSingle(QMouseEvent *event);

    virtual void contextMenuEvent(QContextMenuEvent *event);

private:

};

#endif // QMYCUSTOMPLOT_H