logplus/logPlus/TransparentGroupResult.cpp

#include "TransparentGroupResult.h"
#include "TransparentDraggableResult.h"
extern double g_dPixelPerCm;//每厘米像素数

TransparentGroupResult::TransparentGroupResult(QMyCustomPlot *parentPlot,  TransparentGroupResult *upDraggableResult, QString strUuid, double minWidth, QString strTitle)
	: QObject(parentPlot), mPlot(parentPlot), mstrTitle(strTitle), mMinWidth(minWidth)
{
	m_strUuid = strUuid;
	//
	initRect();

}

TransparentGroupResult::~TransparentGroupResult() 
{
	if(mPlot) {
//            mPlot->removeItem(mRect);
//            mPlot->removeItem(mLeftHandle);
//            mPlot->removeItem(mRightHandle);
	}
}

void TransparentGroupResult::addResultToPlot(double left_Low, double right_Hight, QString myResult, QString &strUuid)
{
	//获取上方Rect
	TransparentDraggableResult *upDragRect = nullptr;
	if (strUuid != "")
	{
		upDragRect = (TransparentDraggableResult *)m_mapDraggable_Result[strUuid];
	}

	strUuid = getUUid();

	// 在初始化代码中
	TransparentDraggableResult *dragRect = new TransparentDraggableResult(mPlot, upDragRect, strUuid);
	//图片，提前设值，后面setRange改变
	dragRect->setResult(myResult);
	// 设置初始范围
	dragRect->setRange(left_Low, right_Hight);
	// 可选：设置颜色
	//dragRect->setColor(QColor(255, 0, 0, 80)); // 半透明红色
	//最小宽度
	dragRect->setMinWidth(0.1);
	//dragRect->setTitle(strText);

	m_vecResult << strUuid;
	m_mapDraggable_Result[strUuid] = dragRect;
}

//设置最小宽度
void TransparentGroupResult::setMinWidth(double minWidth)
{
	mMinWidth = minWidth;
}

//设置标题
void TransparentGroupResult::setTitle(QString strTitle)
{
	mstrTitle = strTitle;
	mItemTitle->setText(mstrTitle);
    //mPlot->replot();
}

//设置解释结论
void TransparentGroupResult::setResult(QString filePath)
{
	m_Result = filePath;
}

// 设置矩形范围
void TransparentGroupResult::setRange(double left_Low, double right_Hight) 
{
	if(left_Low >= right_Hight) return;

	double lY1 = mPlot->yAxis->range().lower;//+10
	double lY2 = (mPlot->yAxis->range().upper-mPlot->yAxis->range().lower)/2;
	mRect->topLeft->setCoords(left_Low, lY1);
	mRect->bottomRight->setCoords(right_Hight, mPlot->yAxis->range().upper);

	mItemTitle->position->setCoords((mRect->topLeft->coords().x() + mRect->bottomRight->coords().x())/2,
									lY2 + lY2/2);

	updateHandles();
}

void TransparentGroupResult::setDragRange(double left_Low, double right_Hight)
{
	if (left_Low >= right_Hight) return;

	double lY1 = mPlot->yAxis->range().lower;//+10
	double lY2 = (mPlot->yAxis->range().upper - mPlot->yAxis->range().lower) / 2;
	mDragRect->topLeft->setCoords(left_Low, lY1);
	mDragRect->bottomRight->setCoords(right_Hight, mPlot->yAxis->range().upper);
}

// 获取当前范围
QCPRange TransparentGroupResult::getRange() 
{
	return QCPRange(mRect->topLeft->coords().x(), mRect->bottomRight->coords().x());
}

// 删除框图
void TransparentGroupResult::deleteRect() 
{
	if(mPlot) {

		mPlot->m_mapDraggable_Result.remove(m_strUuid);

		mPlot->removeItem(mRect);
		mPlot->removeItem(mLeftHandle);
		mPlot->removeItem(mRightHandle);
		mPlot->removeItem(mItemTitle);

		mPlot->replot();
		this->deleteLater();

	}
}


void TransparentGroupResult::setSelectRect(bool bselect)
{
	if (bselect)
	{
		mRect->setBrush(QColor(255, 0, 0, 80));
		mRect->setPen(QPen(Qt::black, 1, Qt::DashLine));
	}
	else
	{
		mRect->setBrush(Qt::NoBrush);
		mRect->setPen(Qt::NoPen);
	}
	mPlot->replot();
}

int TransparentGroupResult::getCursor()
{
	if (m_bMoveRect)
	{
		return 2;
	}
	if (m_bArrow)
	{
		return 1;
	}
	return 0;
}

void TransparentGroupResult::initRect() 
{
	// 创建透明矩形
	mDragRect = new QCPItemRect(mPlot);
	mDragRect->setLayer("overlay"); // 确保在最上层
	mDragRect->setBrush(Qt::NoBrush);
	mDragRect->setPen(QPen(Qt::red, 1, Qt::DashDotDotLine));
	mDragRect->setVisible(false);

	mDragLine = new QCPItemStraightLine(mPlot);
	mDragLine->setPen(QPen(Qt::red, 1));
	mDragLine->setVisible(false);

	// 创建透明矩形
	mRect = new QCPItemRect(mPlot);
	mRect->setLayer("overlay"); // 确保在最上层
	mRect->setBrush(Qt::NoBrush);
	mRect->setPen(Qt::NoPen);

	// 创建左右边界控制点
	mLeftHandle = new QCPItemRect(mPlot);
	mLeftHandle->setLayer("overlay");
	mLeftHandle->setBrush(Qt::NoBrush);
	mLeftHandle->setPen(Qt::NoPen);

	mRightHandle = new QCPItemRect(mPlot);
	mRightHandle->setLayer("overlay");
	mRightHandle->setBrush(Qt::NoBrush);
	mRightHandle->setPen(Qt::NoPen);

	// 连接鼠标事件
	connect(mPlot, &QCustomPlot::mousePress, this, &TransparentGroupResult::onMousePress);
	connect(mPlot, &QCustomPlot::mouseMove, this, &TransparentGroupResult::onMouseMove);
	connect(mPlot, &QCustomPlot::mouseRelease, this, &TransparentGroupResult::onMouseRelease);

// 	mPixmap = new QCPItemPixmap(mPlot);
// 	//mPixmap->setPixmap(QPixmap(":/image/file.png")); // 设置图片
// 	mPixmap->setScaled(true, Qt::IgnoreAspectRatio); // 设置缩放方式
// 	mPixmap->setLayer("overlay"); // 确保在最上层
// 	QPen pen = QPen(Qt::black);
// 	pen.setWidth(1);
// 	mPixmap->setPen(pen);

	mItemTitle = new QCPItemText(mPlot);
	mItemTitle->setText(mstrTitle);
	//mItemTitle->setBrush(QBrush(Qt::red));
	mItemTitle->setFont(QFont("Arial", 12, QFont::Bold));
	mItemTitle->setColor(Qt::black);
	mItemTitle->setPositionAlignment(Qt::AlignTop | Qt::AlignHCenter);
	mItemTitle->position->setType(QCPItemPosition::ptPlotCoords);
	//mItemTitle->position->setType(QCPItemPosition::ptAxisRectRatio);
	mItemTitle->position->setCoords(0.5, 0);
	mItemTitle->setLayer("overlay");
}

void TransparentGroupResult::updateHandles() 
{
	// 左边界矩形控制点
	mLeftHandle->topLeft->setParentAnchor(mRect->topLeft);
	mLeftHandle->bottomRight->setParentAnchor(mRect->topRight);//(mRect->bottomLeft);
	mLeftHandle->topLeft->setCoords(-0.5, 0.5);      // 矩形大小
	mLeftHandle->bottomRight->setCoords(0.5, -0.5);  // 矩形大小

	// 右边界矩形控制点
	mRightHandle->topLeft->setParentAnchor(mRect->bottomLeft);
	mRightHandle->bottomRight->setParentAnchor(mRect->bottomRight);
	mRightHandle->topLeft->setCoords(-0.5, 0.5);      // 矩形大小
	mRightHandle->bottomRight->setCoords(0.5, -0.5);  // 矩形大小
}

TransparentDraggableResult* TransparentGroupResult::getSelectItemResult(QPoint pt)
{
	TransparentDraggableResult* pret = NULL;
	QObjectList objList = m_mapDraggable_Result.values();
	for (int i = 0; i < objList.size(); i++)
	{
		TransparentDraggableResult* p = qobject_cast<TransparentDraggableResult*>(objList.at(i));
		if (p && p->getLeftHandle())
		{
			if (p->getLeftHandle()->selectTest(pt, false) < 5) {
				pret = p;
				break;
			}
			
		}
	}
	return pret;
}

void TransparentGroupResult::onDelRect()
{
	//mDragMode = DragNone;
	//删除框图
	deleteRect();
}

void TransparentGroupResult::onMousePress(QMouseEvent *event) 
{
	event->accept();

	if (event->button() == Qt::LeftButton)
	{
		double y = mPlot->xAxis->pixelToCoord(event->pos().y());//x轴展示深度
		QCPRange currentRange = getRange();

		if (mLeftHandle->selectTest(event->pos(), false) < 5) {
			mDragMode = DragLeft;
		}
		else if (mRightHandle->selectTest(event->pos(), false) < 5) {
			mDragMode = DragRight;
		}
		else
		{
			TransparentDraggableResult* p = this->getSelectItemResult(event->pos());
			if (p)
			{
				m_pDragResult = p;
				mDragMode = DragItem;
				currentRange = p->getRange();
			}
			else if (y >= currentRange.lower && y <= currentRange.upper)
			{
				mDragMode = DragRect;
			}
			else
			{
				mDragMode = DragNone;
				setSelectRect(false);
				return;
			}
		}
		setSelectRect(true);

		//mDragStartX = x;
		mDragStartY = y;
		mDragStartRange = currentRange;
	}
}

void TransparentGroupResult::onMouseMove_in(QMouseEvent *event) 
{
	//double x = mPlot->xAxis->pixelToCoord(event->pos().x());
	//double dx = x - mDragStartX;

	double y = mPlot->xAxis->pixelToCoord(event->pos().y());
	double dy = y - mDragStartY;

	QCPRange newRange = mDragStartRange;

	switch(mDragMode) {
	case DragLeft: {
		//double proposedLeft = mDragStartRange.lower + dx;
		double proposedLeft = mDragStartRange.lower + dy;
		// 确保不超出轴范围且不使宽度小于最小值
		newRange.lower = proposedLeft;
		break;
	}
	case DragRight: {
		//double proposedRight = mDragStartRange.upper + dx;
		double proposedRight = mDragStartRange.upper + dy;
		// 确保不超出轴范围且不使宽度小于最小值
		newRange.upper = proposedRight;
		break;
	}
	case DragItem: {
		break;
	}
	case DragRect: {
		double width = mDragStartRange.size();
		//double center = mDragStartRange.center() + dx;
		double center = mDragStartRange.center() + dy;
		newRange.lower = center - width/2;
		newRange.upper = center + width/2;

		break;
	}
	default:
		break;
	}
	// 最终确保宽度不小于最小值（针对整体拖动的情况）
	if(newRange.size() < mMinWidth) {
		if(mDragMode == DragRect) {
			// 如果是整体拖动，保持中心点不变
			double center = newRange.center();
			newRange.lower = center - mMinWidth/2;
			newRange.upper = center + mMinWidth/2;
		} else {
			// 如果是边界拖动，强制设置最小宽度
			if(mDragMode == DragLeft) {
				newRange.lower = newRange.upper - mMinWidth;
			} else if(mDragMode == DragRight) {
				newRange.upper = newRange.lower + mMinWidth;
			}
		}
	}

	if (abs(dy) > 0.2)
	{
		if (mDragMode == DragItem)
		{
			mDragLine->setVisible(true);
			mDragLine->point1->setCoords(mDragStartRange.upper+dy, 0);
			mDragLine->point2->setCoords(mDragStartRange.upper+dy, 1);
		}
		else
		{
			mDragRect->setVisible(true);
			setDragRange(newRange.lower, newRange.upper);
		}
	}
	//setRange(newRange.lower, newRange.upper);
}

void TransparentGroupResult::onMouseMove(QMouseEvent *event) 
{
	if (mDragMode == DragRect)
	{
		m_bMoveRect = true;
	}
	else if (mLeftHandle->selectTest(event->pos(), false) < 5
		|| mRightHandle->selectTest(event->pos(), false) < 5
		|| this->getSelectItemResult(event->pos())
		|| (mDragMode > DragNone && mDragMode <= DragItem))
	{
		m_bArrow = true;
		m_bMoveRect = false;
	}
	else
	{
		m_bArrow = false;
		m_bMoveRect = false;
	}

	if(mDragMode == DragNone) return;

	event->accept();

	onMouseMove_in(event);

	//后面统一刷新上方和下方rect
	mPlot->replot();
}

void TransparentGroupResult::onMouseRelease_in(QMouseEvent *event) 
{
	if(event->button() == Qt::LeftButton && mDragMode != DragNone) {
		event->accept();
		//避免二次绘制框图
		mPlot->m_bDrawRect = false;
		//emit rangeChanged(getRange());
		mDragMode = DragNone;
   }
}

void TransparentGroupResult::onMouseRelease(QMouseEvent *event) 
{

	if(event->button() == Qt::LeftButton && mDragMode != DragNone) {

		if (mDragRect->visible())
		{
			double y = mPlot->xAxis->pixelToCoord(event->pos().y());
			double dy = y - mDragStartY;

			QCPRange newRange = mDragStartRange;

			switch (mDragMode) {
			case DragLeft: {
				//double proposedLeft = mDragStartRange.lower + dx;
				double proposedLeft = mDragStartRange.lower + dy;
				// 确保不超出轴范围且不使宽度小于最小值
				newRange.lower = qBound(
					//mPlot->xAxis->range().lower,
					getMyLower(),
					proposedLeft,
					mDragStartRange.upper - mMinWidth);
				break;
			}
			case DragRight: {
				//double proposedRight = mDragStartRange.upper + dx;
				double proposedRight = mDragStartRange.upper + dy;
				// 确保不超出轴范围且不使宽度小于最小值
				newRange.upper = qBound(
					mDragStartRange.lower + mMinWidth,
					proposedRight,
					getMyUpper());
				//mPlot->xAxis->range().upper);
				break;
			}
			case DragRect: {
				double width = mDragStartRange.size();
				//double center = mDragStartRange.center() + dx;
				double center = mDragStartRange.center() + dy;
				newRange.lower = center - width / 2;
				newRange.upper = center + width / 2;

				// 检查是否超出轴范围
				if (newRange.lower < getMyLower()) {
					newRange.lower = getMyLower();
					newRange.upper = newRange.lower + width;
				}
				else if (newRange.upper > getMyUpper()) {
					newRange.upper = getMyUpper();
					newRange.lower = newRange.upper - width;
				}

				break;
			}
			default:
				break;
			}
			// 最终确保宽度不小于最小值（针对整体拖动的情况）
			if (newRange.size() < mMinWidth) {
				if (mDragMode == DragRect) {
					// 如果是整体拖动，保持中心点不变
					double center = newRange.center();
					newRange.lower = center - mMinWidth / 2;
					newRange.upper = center + mMinWidth / 2;
				}
				else {
					// 如果是边界拖动，强制设置最小宽度
					if (mDragMode == DragLeft) {
						newRange.lower = newRange.upper - mMinWidth;
					}
					else if (mDragMode == DragRight) {
						newRange.upper = newRange.lower + mMinWidth;
					}
				}
			}

			mDragRect->setVisible(false);
			mDragLine->setVisible(false);
			setRange(newRange.lower, newRange.upper);

			if (m_vecResult.size() == 1)
			{
				TransparentDraggableResult* pret = qobject_cast<TransparentDraggableResult*>(m_mapDraggable_Result.value(m_vecResult.at(0)));
				if (pret)
				{
					pret->setRange(newRange.lower, newRange.upper);
				}
			}
			else
			{
				if (mDragMode == DragRect)
				{
					float offset = mDragStartRange.lower - getRange().lower;
					for (int i = 0; i < m_vecResult.size(); i++)
					{
						TransparentDraggableResult* pret = qobject_cast<TransparentDraggableResult*>(m_mapDraggable_Result.value(m_vecResult.at(i)));
						if (pret == NULL)
							continue;
						QCPRange rg = pret->getRange();
						pret->setRange(rg.lower - offset, rg.upper - offset);
					}
					
				}
				else
				{
					TransparentDraggableResult* pret = qobject_cast<TransparentDraggableResult*>(m_mapDraggable_Result.value(m_vecResult.at(0)));
					if (pret)
					{
						pret->setRange(pret->getRange().lower, newRange.upper);
					}
					pret = qobject_cast<TransparentDraggableResult*>(m_mapDraggable_Result.value(m_vecResult.last()));
					if (pret)
					{
						pret->setRange(newRange.lower, pret->getRange().upper);
					}
				}
			}
		}
		else if (mDragLine->visible())
		{
		if (mDragMode == DragItem)
		{
			if (m_pDragResult)
			{
				double y = mPlot->xAxis->pixelToCoord(event->pos().y());
				double dy = y - mDragStartY;

				QCPRange rg = m_pDragResult->getRange();
				m_pDragResult->setRange(rg.lower, rg.upper + dy);

				TransparentDraggableResult* upr = m_pDragResult->getUpResult();
				if (upr)
				{
					QCPRange rg = upr->getRange();
					upr->setRange(rg.lower + dy, rg.upper);
				}
				m_pDragResult = NULL;
			}
			mDragLine->setVisible(false);
		}
		}
		mPlot->replot();
	}

	onMouseRelease_in(event);
}

double TransparentGroupResult::getMyLower()
{
	double dLower = mPlot->xAxis->range().lower;
	double proposedLeft = mDragStartRange.lower;

	TransparentGroupResult *pDraggableRect =NULL;
	{
		QMap<QString,QObject *>::Iterator it = mPlot->m_mapDragGroup.begin();
		while( it != mPlot->m_mapDragGroup.end() )
		{
			if(it.key() == m_strUuid)
			{
				it++;
				continue;
			}
			pDraggableRect = (TransparentGroupResult*)it.value();
			//
			QCPRange tmpRange = pDraggableRect->getRange();
			if(tmpRange.upper >= dLower && tmpRange.upper <= proposedLeft)
			{
				dLower = tmpRange.upper;
			}
			it++;
		}
	}

	return dLower;
}

double TransparentGroupResult::getMyUpper()
{
	double dUpper = mPlot->xAxis->range().upper;
	double proposedRight = mDragStartRange.upper;

	TransparentGroupResult *pDraggableRect =NULL;
	{
		QMap<QString,QObject *>::Iterator it = mPlot->m_mapDragGroup.begin();
		while( it != mPlot->m_mapDragGroup.end() )
		{
			if(it.key() == m_strUuid)
			{
				it++;
				continue;
			}
			pDraggableRect = (TransparentGroupResult*)it.value();
			//
			QCPRange tmpRange = pDraggableRect->getRange();
			if(tmpRange.lower <= dUpper && tmpRange.lower >= proposedRight)
			{
				dUpper = tmpRange.lower;
			}
			it++;
		}
	}

	return dUpper;
}